[TechAssist] Re: Daewoo, DTQ-29S1FCN, Chassis CN2001

  • From: "Premium Technologies" <premtech@xxxxxxxxxxxxxx>
  • To: <techassist@xxxxxxxxxxxxx>
  • Date: Wed, 27 Mar 2002 13:35:02 -0800


Hi Jeff
Yes, the location number for HOT is Q402, not Q804 as in the repair tip.  I
have my eyes on it as we speak.  HOT is definitely Q402 and crosses to an
NTE 2353, while Q804 I think crosses to an NTE 379 - major difference.  I
don't yet have my parts to complete this repair but I will keep you updated.
The service bulletin said, "For thermal runaway of Q402, add a 33 ohm 1/4w
resistor to Q402, Base to Emitter."  There are four bulletins on this that I
could find.
Bill

Premium Technologies
Ocean Park, WA. 98640
Phone: (360) 665-5984
Fax:     (605) 253-4530
email: premtech@xxxxxxxxxxxxxx
----- Original Message -----
From: "Jeff Dougherty" <jeff@xxxxxxxxxxxxxxxxxx>
To: <techassist@xxxxxxxxxxxxx>
Sent: Wednesday, March 27, 2002 12:50 PM
Subject: [TechAssist] Re: Daewoo, DTQ-29S1FCN, Chassis CN2001


>
> Bill,
> Thanks for the plug...
> Which one of those is the HOT? It would be nice if others posted ALL
> pertinent information when they post fixes, but I can only enter the
> information provided to me.
> Can you verify if this is what fixed your unit and what location number
the
> HOT is?
> Thanks.
> Jeff
>
> FAX 717-564-4952
> Jeff Dougherty
> Intrepid Video & Electronics
> 501 Luther Rd
> Harrisburg, PA 17111
> 717-909-8844
> VCR tips, electronics info & general interest.
> www.intrepid-video.com www.tech-repair.net www.thetoolcaddy.com
>
>
> ----- Original Message -----
> From: "Premium Technologies" <premtech@xxxxxxxxxxxxxx>
> To: <techassist@xxxxxxxxxxxxx>
> Sent: Tuesday, March 26, 2002 8:28 PM
> Subject: [TechAssist] Re: Daewoo, DTQ-29S1FCN, Chassis CN2001
>
>
> >
> > Hi Jeff,
> > They should have it, it's a heck of a tool!  You might want to verify
that
> > fix though, in that record number.  I found other references from a
> service
> > bulletin that suggest, that a 33ohm 1/4w resistor be placed from base to
> > emitter on Q402, and not on Q804.  My thought being that maybe the pos
> > numbers got transposed or mixed up.
> > Thanks Jeff!
> > Bill
> >
> > Premium Technologies
> > Ocean Park, WA. 98640
> > Phone: (360) 665-5984
> > Fax:     (605) 253-4530
> > email: premtech@xxxxxxxxxxxxxx
> > ----- Original Message -----
> > From: "Jeff Dougherty" <jeff@xxxxxxxxxxxxxxxxxx>
> > To: <techassist@xxxxxxxxxxxxx>
> > Sent: Tuesday, March 26, 2002 5:14 PM
> > Subject: [TechAssist] Re: Daewoo, DTQ-29S1FCN, Chassis CN2001
> >
> >
> > >
> > > Bill,
> > > Not everyone on this list has the Tech Repair CD nor do they know what
> you
> > > refer to when you mention that record number.
> > > Q804* Q805 IN POWER SUPPLY* ADDED MOD* 33OHM*1/2W C TO E OF H.O.T.
> > > I take it to mean leave the jumper in place.
> > > Good luck.
> > > Jeff
> > >
> > > FAX 717-564-4952
> > > Jeff Dougherty
> > > Intrepid Video & Electronics
> > > 501 Luther Rd
> > > Harrisburg, PA 17111
> > > 717-909-8844
> > > VCR tips, electronics info & general interest.
> > > www.intrepid-video.com www.tech-repair.net www.thetoolcaddy.com
> > >
> > >
> > > ----- Original Message -----
> > > From: "Premium Technologies" <premtech@xxxxxxxxxxxxxx>
> > > To: <techassist@xxxxxxxxxxxxx>
> > > Sent: Monday, March 25, 2002 9:33 PM
> > > Subject: [TechAssist] Daewoo, DTQ-29S1FCN, Chassis CN2001
> > >
> > >
> > > >
> > > > Hi Group,
> > > > Got this set in today dead, blown fuse.  Traced problem to Q804 and
> > > ordered
> > > > it, and also found C404, 1mf-160v open, no ESR reading on
CapAnalyzer
> at
> > > > all.  Customer complained that for a long time set would just
shutdown
> > > > randomly.  But, after awhile, it could be turned-on again. He ran it
> > this
> > > > way for some time, until recently it shut-down and that was all she
> > wrote.
> > > > Went to repair tips and found notes on replacing C404 with a
> 3.3mf-160v
> > > and
> > > > a modification outlining the installation of a 30 ohm 1/2w resistor.
> > Can
> > > > anyone expound on this?  The notes I found were in record #17210 and
> I'm
> > > not
> > > > sure if the connection point of this modification refers to the Base
> and
> > > > Emitter connection of Q804 or if it's reference could mean just
> > replacing
> > > > the jump connection that already exists at J246?
> > > > I've tried looking for other sources to further explain this
> > modification
> > > > and couldn't readily find any.
> > > > Any insight would be most appreciated.
> > > > Bill
> > > >
> > > > Premium Technologies
> > > > Ocean Park, WA. 98640
> > > > Phone: (360) 665-5984
> > > > Fax:     (605) 253-4530
> > > > email: premtech@xxxxxxxxxxxxxx
> > > >
> > > > ------------------------------------------
> > > > Make your TechAssist database better!
> > > > Submit Repair Tips here: http://www.tech-assist.org/secure/tip/
> > > > ------------------------------------------
> > > > To UNSUBSCRIBE your email address, click here:
> > > > mailto:techassist-request@xxxxxxxxxxxxx?subject=unsubscribe
> > > > Or send a BLANK email with unsubscribe in the
> > > > SUBJECT field to the address above.
> > > >
> > >
> > > ------------------------------------------
> > > Make your TechAssist database better!
> > > Submit Repair Tips here: http://www.tech-assist.org/secure/tip/
> > > ------------------------------------------
> > > To UNSUBSCRIBE your email address, click here:
> > > mailto:techassist-request@xxxxxxxxxxxxx?subject=unsubscribe
> > > Or send a BLANK email with unsubscribe in the
> > > SUBJECT field to the address above.
> >
> > ------------------------------------------
> > Make your TechAssist database better!
> > Submit Repair Tips here: http://www.tech-assist.org/secure/tip/
> > ------------------------------------------
> > To UNSUBSCRIBE your email address, click here:
> > mailto:techassist-request@xxxxxxxxxxxxx?subject=unsubscribe
> > Or send a BLANK email with unsubscribe in the
> > SUBJECT field to the address above.
> >
>
> ------------------------------------------
> Make your TechAssist database better!
> Submit Repair Tips here: http://www.tech-assist.org/secure/tip/
> ------------------------------------------
> To UNSUBSCRIBE your email address, click here:
> mailto:techassist-request@xxxxxxxxxxxxx?subject=unsubscribe
> Or send a BLANK email with unsubscribe in the
> SUBJECT field to the address above.

------------------------------------------
Make your TechAssist database better!  
Submit Repair Tips here: http://www.tech-assist.org/secure/tip/
------------------------------------------
To UNSUBSCRIBE your email address, click here:
mailto:techassist-request@xxxxxxxxxxxxx?subject=unsubscribe
Or send a BLANK email with unsubscribe in the
SUBJECT field to the address above.

Other related posts: