Bill, Not everyone on this list has the Tech Repair CD nor do they know what you refer to when you mention that record number. Q804* Q805 IN POWER SUPPLY* ADDED MOD* 33OHM*1/2W C TO E OF H.O.T. I take it to mean leave the jumper in place. Good luck. Jeff FAX 717-564-4952 Jeff Dougherty Intrepid Video & Electronics 501 Luther Rd Harrisburg, PA 17111 717-909-8844 VCR tips, electronics info & general interest. www.intrepid-video.com www.tech-repair.net www.thetoolcaddy.com ----- Original Message ----- From: "Premium Technologies" <premtech@xxxxxxxxxxxxxx> To: <techassist@xxxxxxxxxxxxx> Sent: Monday, March 25, 2002 9:33 PM Subject: [TechAssist] Daewoo, DTQ-29S1FCN, Chassis CN2001 > > Hi Group, > Got this set in today dead, blown fuse. Traced problem to Q804 and ordered > it, and also found C404, 1mf-160v open, no ESR reading on CapAnalyzer at > all. Customer complained that for a long time set would just shutdown > randomly. But, after awhile, it could be turned-on again. He ran it this > way for some time, until recently it shut-down and that was all she wrote. > Went to repair tips and found notes on replacing C404 with a 3.3mf-160v and > a modification outlining the installation of a 30 ohm 1/2w resistor. Can > anyone expound on this? The notes I found were in record #17210 and I'm not > sure if the connection point of this modification refers to the Base and > Emitter connection of Q804 or if it's reference could mean just replacing > the jump connection that already exists at J246? > I've tried looking for other sources to further explain this modification > and couldn't readily find any. > Any insight would be most appreciated. > Bill > > Premium Technologies > Ocean Park, WA. 98640 > Phone: (360) 665-5984 > Fax: (605) 253-4530 > email: premtech@xxxxxxxxxxxxxx > > ------------------------------------------ > Make your TechAssist database better! > Submit Repair Tips here: http://www.tech-assist.org/secure/tip/ > ------------------------------------------ > To UNSUBSCRIBE your email address, click here: > mailto:techassist-request@xxxxxxxxxxxxx?subject=unsubscribe > Or send a BLANK email with unsubscribe in the > SUBJECT field to the address above. > ------------------------------------------ Make your TechAssist database better! Submit Repair Tips here: http://www.tech-assist.org/secure/tip/ ------------------------------------------ To UNSUBSCRIBE your email address, click here: mailto:techassist-request@xxxxxxxxxxxxx?subject=unsubscribe Or send a BLANK email with unsubscribe in the SUBJECT field to the address above.