[TechAssist] Re: CTC187CL3 blows Horz. output tr

  • From: "junior hurdle" <jselectronics@xxxxxxxxxxxx>
  • To: <techassist@xxxxxxxxxxxxx>
  • Date: Sun, 17 Aug 2003 20:08:13 -0400

J'S electronics
Howells + RD
St. Michael
Barbados
Phone# 246-4298535
email jselectronics@xxxxxxxxxxxx
----- Original Message ----- 
From: "junior hurdle" <jselectronics@xxxxxxxxxxxx>
To: <techassist@xxxxxxxxxxxxx>
Sent: Sunday, August 17, 2003 2:41 AM
Subject: [TechAssist] CTC187CL3 blows Horz. output tr


> Hi techs
> I replaced the FBT , the hot (BUH517) and C709 (47mf @ 25V) in this
ctc-187CL3 rca.
> Before I could adjust the screen and focus the HOT shorted out again. I
replaced the
> HOT again to see if it was heating rapidly. After 30 seconds I checked the
transistor
> and found it to be very hot . I plugged the set in again and before I
could turn it on the
> HOT shorted out again. I checked all components in the horz.circuit as
well as the
> signal going to the horz. output but they all checked ok.
> could any one tell me what could be causing this transistor to keep
shorting?


> thank you
.
> junior Hurdle
>
****************************************************************************
*
> Classifieds! Buy or Sell!
> http://sell.tech-assist.org
> The Tech Address Book:
> http://www.tech-assist.org/secure/tip/contact.htm
> Add a Repair Tip Here, or Change/Remove your Email Address:
> http://www.tech-assist.org/secure/tip/main.htm
> Lost Password:
> http://www.tech-assist.org  and select "Lost your Login Info?".
> Email Archives:
> //www.freelists.org/archives/techassist/
>
>


*****************************************************************************
Classifieds! Buy or Sell!
http://sell.tech-assist.org
The Tech Address Book:
http://www.tech-assist.org/secure/tip/contact.htm
Add a Repair Tip Here, or Change/Remove your Email Address:
http://www.tech-assist.org/secure/tip/main.htm
Lost Password:
http://www.tech-assist.org  and select "Lost your Login Info?".
Email Archives:
//www.freelists.org/archives/techassist/

Other related posts: