Glad I could be of help! We saved another one from the landfill AND produced a good working set! AND 'hopefully' at a profit :-) Clancy Harms NESDA's Region 7 Director Dick's Radio & TV, Inc. 2319 West Clay St. If it's broken...a real man can St. Charles, MO. 63301 can break it even better ! (636)-724-5055 (636)-724-5531 fax email: dickstv1@xxxxxxxxxxxxx mailto:dickstv1@xxxxxxxxxxxxx ----- Original Message ----- From: "Premium Technologies" <premtech@xxxxxxxxxxxxxx> To: <techassist@xxxxxxxxxxxxx> Sent: Friday, February 15, 2002 12:32 AM Subject: [TechAssist] Re: 1989 Zenith Md# SF3537H > > Clancy, > YES, and thank you very much! I used one of the boards that you sent, even > though the FB numbers were not the same. Went through and cleaned all the > pins, including main module, and had to reset some of the service menu. > It's actually got a better picture than my new 36" Philips. > I sent you today the one board I didn't use plus my old board minus the bad > FB, by UPS, and separately a check for 60.00 made to cash via US mail. > Thanks again Clancy! > > Bill > > Premium Technologies > 27501 V Street > Ocean Park, Washington 98640 > Phone: (360) 665-5984 > Fax: (775) 860-7747 > email: premtech@xxxxxxxxxxxxxx > ----- Original Message ----- > From: "Clancy Harms" <dickstv1@xxxxxxxxxxxxx> > To: <techassist@xxxxxxxxxxxxx> > Sent: Thursday, February 14, 2002 3:16 PM > Subject: [TechAssist] Re: 1989 Zenith Md# SF3537H > > > > Bill > > Did you ever get this problem resolved? > > > > Clancy Harms NESDA's Region 7 Director > > Dick's Radio & TV, Inc. > > 2319 West Clay St. > > St. Charles, MO. 63301 > > (636)-724-5055 > > (636)-724-5531 fax > > email: dickstv1@xxxxxxxxxxxxx > > ----- Original Message ----- > > From: Premium Technologies > > To: techassist@xxxxxxxxxxxxx > > Sent: Wednesday, February 13, 2002 4:07 PM > > Subject: [TechAssist] 1989 Zenith Md# SF3537H > > > > > > > > Hi Group, > > Need the sequence and codes to access the service menu on this TV. Just > > installed a used sweep module, thanks to Clancy, and now the vertical > height > > needs to be adjusted. There are no manual adjustments that I can find > for > > this, and the main board module seems to be a maze of logic boards, > eprom > > and memory. So I am assuming that any vertical adjustments are accessed > > through the service menu. Have no schematics, manual or anything on this > TV > > so any assistance would greatly appreciated! > > Bill > > > > Premium Technologies > > 27501 V Street > > Ocean Park, Washington 98640 > > Phone: (360) 665-5984 > > Fax: (775) 860-7747 > > email: premtech@xxxxxxxxxxxxxx > > > > ------------------------------------------ > > Make your TechAssist database better! > > Submit Repair Tips here: http://www.tech-assist.org/secure/tip/ > > ------------------------------------------ > > To UNSUBSCRIBE your email address, click here: > > mailto:techassist-request@xxxxxxxxxxxxx?subject=unsubscribe > > Or send a BLANK email with unsubscribe in the > > SUBJECT field to the address above. > > > > > > ------------------------------------------ > > Make your TechAssist database better! > > Submit Repair Tips here: http://www.tech-assist.org/secure/tip/ > > ------------------------------------------ > > To UNSUBSCRIBE your email address, click here: > > mailto:techassist-request@xxxxxxxxxxxxx?subject=unsubscribe > > Or send a BLANK email with unsubscribe in the > > SUBJECT field to the address above. > > ------------------------------------------ > Make your TechAssist database better! > Submit Repair Tips here: http://www.tech-assist.org/secure/tip/ > ------------------------------------------ > To UNSUBSCRIBE your email address, click here: > mailto:techassist-request@xxxxxxxxxxxxx?subject=unsubscribe > Or send a BLANK email with unsubscribe in the > SUBJECT field to the address above. > ------------------------------------------ Make your TechAssist database better! Submit Repair Tips here: http://www.tech-assist.org/secure/tip/ ------------------------------------------ To UNSUBSCRIBE your email address, click here: mailto:techassist-request@xxxxxxxxxxxxx?subject=unsubscribe Or send a BLANK email with unsubscribe in the SUBJECT field to the address above.