Dave, We have hundreds of Peek Elite heads around the county. We have had instances of heads coming down due to the bushes working loose however this has mainly been on older heads. As far as the sliding plates that Tony refers to, these seem to break as soon as anything touches the head which then leads to OOA faults.=20 Peek have not come up with any solutions that we are aware of. Regards Chris Gladwyn -----Original Message----- From: tcug-bounce@xxxxxxxxxxxxx [mailto:tcug-bounce@xxxxxxxxxxxxx] On Behalf Of Oliver David B Sent: 11 July 2007 08:28 To: tcug@xxxxxxxxxxxxx Subject: [TCUG] Peek Elite signal heads Has anyone experienced problems with PEEK Elite signal heads becoming detac=3D hed from the signal head brackets due to the fixing=3D20bush on the head becoming=3D loose=3D3F If so have PEEK commented on the problem or proposed any solutions=3D3F Any feedback would be appreciated. Regards, Dave Oliver Traffic Signals Manager Highways & Traffic Signals Website address www.newcastle.gov.uk Engineering Services Newcastle City Council Stratford House Phone +44 (0)191 278 3934 Newington Road East Mobile=3D20 +44 (0)797 6122403 Newcastle upon Tyne Fax +44 (0)191 278 3805 NE2 1PX e-mail david.b.oliver@xxxxxxxxxxxxxxxx ----------------------------------------------------------- A message from the TCUG mailing list. For information about the list visit //www.freelists.org/webpage/tcug The information in this e-mail is confidential and may be legally privilege= d. It is intended solely for the addressee. Access to this email by anyone = else is unauthorised. Any views or opinions expressed in this e-mail may be= solely those of the author and are not necessarily those of Mouchel Parkman Mouchel Parkman Services Ltd, Registered in England at West Hall, Parvis Ro= ad, West Byfleet, Surrey UK KT14 6EZ Registered No : 1686040 ----------------------------------------------------------- A message from the TCUG mailing list. For information about the list visit //www.freelists.org/webpage/tcug