Getting there, Paul… getting there! From: tcb-bounce@xxxxxxxxxxxxx [mailto:tcb-bounce@xxxxxxxxxxxxx] On Behalf Of singlecabboy Sent: Thursday, April 11, 2013 7:38 PM To: tcb@xxxxxxxxxxxxx Subject: [tcb] Re: grease fittings on 1961 sc beam? No kiddin, Scott, some day you'll be old and beat up lol Paul Smith The Zone 1961 Delux Singlecab --- On Thu, 4/11/13, Scott Garvie <sgarvie@xxxxxxxxx> wrote: From: Scott Garvie <sgarvie@xxxxxxxxx> Subject: [tcb] Re: grease fittings on 1961 sc beam? To: tcb@xxxxxxxxxxxxx Date: Thursday, April 11, 2013, 6:33 PM Well, then… quit puttin’ The Zone on a trailer! From: tcb-bounce@xxxxxxxxxxxxx [mailto:tcb-bounce@xxxxxxxxxxxxx] On Behalf Of singlecabboy Sent: Thursday, April 11, 2013 5:56 PM To: tcb@xxxxxxxxxxxxx Subject: [tcb] Re: grease fittings on 1961 sc beam? Thank you Ken, mine are knocked plumb out.I probably got them with a tie down? Paul Smith The Zone 1961 Delux Singlecab --- On Thu, 4/11/13, Ken Linoski <kenlinoski@xxxxxxxxx <http://us.mc1844.mail.yahoo.com/mc/compose?to=kenlinoski@xxxxxxxxx> > wrote: From: Ken Linoski <kenlinoski@xxxxxxxxx <http://us.mc1844.mail.yahoo.com/mc/compose?to=kenlinoski@xxxxxxxxx> > Subject: [tcb] Re: grease fittings on 1961 sc beam? To: "tcb@xxxxxxxxxxxxx <http://us.mc1844.mail.yahoo.com/mc/compose?to=tcb@xxxxxxxxxxxxx> " <tcb@xxxxxxxxxxxxx <http://us.mc1844.mail.yahoo.com/mc/compose?to=tcb@xxxxxxxxxxxxx> > Date: Thursday, April 11, 2013, 5:08 PM Paul, what size thread do you need? early ones are a 10x1.0mm thread, later are 8x1.0mm. what is wrong with your originals? if the "square" part is good, you can replace just the actual zerk portion with a new 6x1.0mm fitting. new metric 90 degree fittings are available at just about any auto parts store i've been to. they usually come in packs of 5. new ones do not have the "square" base, they have a "round" base. Ken _____ From: singlecabboy <sealingwaxred@xxxxxxxxx <http://us.mc1844.mail.yahoo.com/mc/compose?to=sealingwaxred@xxxxxxxxx> > To: tcb <tcb@xxxxxxxxxxxxx <http://us.mc1844.mail.yahoo.com/mc/compose?to=tcb@xxxxxxxxxxxxx> > Sent: Thursday, April 11, 2013 2:49 PM Subject: [tcb] grease fittings on 1961 sc beam? anyone know size , push in srew in ect ? I'm at work so can't look at the truck now and everything will be closed when I get off. Paul Smith The Zone 1961 Delux Singlecab