[tcb] Re: grease fittings on 1961 sc beam?
- From: "Scott Garvie" <sgarvie@xxxxxxxxx>
- To: <tcb@xxxxxxxxxxxxx>
- Date: Thu, 11 Apr 2013 18:33:17 -0500
Well, then. quit puttin' The Zone on a trailer!
From: tcb-bounce@xxxxxxxxxxxxx [mailto:tcb-bounce@xxxxxxxxxxxxx] On Behalf
Of singlecabboy
Sent: Thursday, April 11, 2013 5:56 PM
To: tcb@xxxxxxxxxxxxx
Subject: [tcb] Re: grease fittings on 1961 sc beam?
Thank you Ken, mine are knocked plumb out.I probably got them with a tie
down?
Paul Smith
The Zone
1961 Delux Singlecab
--- On Thu, 4/11/13, Ken Linoski <kenlinoski@xxxxxxxxx> wrote:
From: Ken Linoski <kenlinoski@xxxxxxxxx>
Subject: [tcb] Re: grease fittings on 1961 sc beam?
To: "tcb@xxxxxxxxxxxxx" <tcb@xxxxxxxxxxxxx>
Date: Thursday, April 11, 2013, 5:08 PM
Paul,
what size thread do you need? early ones are a 10x1.0mm thread, later are
8x1.0mm.
what is wrong with your originals? if the "square" part is good, you can
replace just the actual zerk portion with a new 6x1.0mm fitting.
new metric 90 degree fittings are available at just about any auto parts
store i've been to. they usually come in packs of 5. new ones do not have
the "square" base, they have a "round" base.
Ken
_____
From: singlecabboy <sealingwaxred@xxxxxxxxx>
To: tcb <tcb@xxxxxxxxxxxxx>
Sent: Thursday, April 11, 2013 2:49 PM
Subject: [tcb] grease fittings on 1961 sc beam?
anyone know size , push in srew in ect ? I'm at work so can't look at the
truck now and everything will be closed when I get off.
Paul Smith
The Zone
1961 Delux Singlecab
Other related posts:
