[tcb] Re: Stud Gun
- From: Jammy <damhippiekustoms@xxxxxxxxx>
- To: tcb@xxxxxxxxxxxxx
- Date: Wed, 23 May 2007 07:58:20 -0700 (PDT)
stud guns are way cool you can use them in so many ways to pull dents and
shrink high spots as well if you by chance pull a in your base metal that your
working on all you need to do is get a high wattage soldering gun and stick the
tip in the hole heat up the surrounding metal and fill with soder and then sand
it down and then apply filler remember filler doesn't need to be more than a
1/4'' thick
Dan Martin <danandkatrinamartin@xxxxxxx> wrote: Yes.
It is a 4500 from here:
http://www.autobodystore.com/stud.htm
On May 23, 2007, at 8:41 AM, sammie smith wrote:
> Ok, Ronnie you gotta explain what a stud gun is. Are you talking
> about the welder that welds studs for pulling dents?
>
> Ronnie Hughes wrote:
> Cool!
>
> I borrowed Dan's stud gun for pulling dents out of body panels and
> it's way cool. Last night I worked some dents out of the gates on
> my single cab that would have been very tough without the stud
> gun. Really reduces the amount of bondo required.
>
> Thanks Dan
>
> Ronnie
>
> Don't get soaked. Take a quick peak at the forecast
> with theYahoo! Search weather shortcut.
>
Dan Martin
1971 VW Bus
H.B.B.
T.C.B.
http://web.mac.com/danandkatrinamartin
http://ical.mac.com/danandkatrinamartin/Volks32Shows
Keep it Aircooled,
Jammy Thomas
Dam Hippie Kustoms
{ uber groovy }
P.S. Those arn't rust holes that weight reduction!!!!!!!!
Shape Yahoo! in your own image. Join our Network Research Panel
today!http://us.rd.yahoo.com/evt=48517/*http://surveylink.yahoo.com/gmrs/yahoo_panel_invite.asp?a=7
hot CTA = Join our Network Research Panel
Other related posts:
