Yes Sonne is a '60. Um, I stole all of the running gear from my '66. I know my tranny is a freeway flyer and I do still have my gear reduction boxes. As for the size of nuts, being a girl I don't know big from small. On Apr 7, 2013, at 6:52 PM, sammie smith <bugcollections@xxxxxxxxxxxxx> wrote: > Sonne is a 60 model, right? Early bus has no lip on the fender well and much > less space between fender and the brake drum than on the 64-67 busses. > Anything bigger than stock is not easy to get in there. It's possible to go > slightly bigger than stock 6:40X15 but it isn't easy to mount the wheel on > the brake drum. Just not enough clearance with the fender. And if you have a > big nut tranny in it the brake drums are a bit wider than the original small > nut tranny and that also uses up space. And I do hope you are going to run a > big nut tranny cause you are going to take forever to get to Shasta if > running the gear ratios in the small nut. > > From: Julie <julie.hey.ho.lets.go@xxxxxxxxx> > To: "tcb@xxxxxxxxxxxxx" <tcb@xxxxxxxxxxxxx> > Sent: Sun, April 7, 2013 6:30:35 PM > Subject: [tcb] Re: BFGs vs. Grabbers > > Yes Sonne is the DC. But I know someone who is on this list that has > Grabbers on his Bus and he does not remember having trouble getting them on > and Shasta guys use them and they all have Splits. > > On Apr 7, 2013, at 6:05 PM, sammie smith <bugcollections@xxxxxxxxxxxxx> wrote: > >> Which bus is Sonne. If the DC, yep, you have trouble fitting tires much >> larger than stock under the fender wells of a split bus. Something you have >> to consider; unless of course you wish to cut out the fender wells, in which >> case you will be banned permanently from all things splitty. >> >> From: Julie <julie.hey.ho.lets.go@xxxxxxxxx> >> To: "tcb@xxxxxxxxxxxxx" <tcb@xxxxxxxxxxxxx> >> Sent: Sun, April 7, 2013 3:33:02 PM >> Subject: [tcb] BFGs vs. Grabbers >> >> I have been looking into buying the tires for Sonne. Some Shasta guys say >> Grabbers and some say BFGs. I have Grabbers on Wieder (zebra) and love them! >> The BFGs are smaller than the Grabbers but have better load rating. BFGs >> D-8 ply and Grabbers C-6 ply. I love how the Grabbers look and fear the BFGs >> won't look as tough. Grabbers 27/8.50R14 (216/76R14) BFGs 195/74/R14 >> (195/75R14) BFGs are 1.41" smaller in diameter/.83" smaller in width/4.43" >> smaller in circumference/.71" shorter in sidewall height. Currently my >> Grabbers (borrowed from Wieder) are not fitting in on the rear of Sonne. My >> metal guy blames the WW metal pieces being off, I am not so sure of that. >> So maybe BFGs will fit without re-doing the metal work. Grabbers are >> cheaper and I imagine will look tougher being that they are larger and will >> give Sonne more clearance. I am thinking of staying with Grabbers. What do >> you guys think?