If using the voltage dropping resistor method be sure he mounts it in a place that gets PLENTY of air flow and not next to any paint you don't want blistered from the heat.
You can probably order a 12V rotor to fit in your wiper motor body. I've read about them somewhere.
G2 sammie smith wrote:
Almost all of the VW parts places sell the rheostat/resistor combination for that purpose and they are about $40.--- On *Fri, 3/27/09, mechmark@xxxxxxxxxxx /<mechmark@xxxxxxxxxxx>/* wrote: From: mechmark@xxxxxxxxxxx <mechmark@xxxxxxxxxxx> Subject: [tcb] Re: 6 volt wiper motor, 12V system To: tcb@xxxxxxxxxxxxx Date: Friday, March 27, 2009, 1:56 PM Why not put a voltage reducer in line with a rheostat. That way you can have the wipers at any speed you want. ----- Original Message ----- From: "Eric Woodall" <eric@xxxxxxxxxxxxxx> To: tcb@xxxxxxxxxxxxx Cc: bustravler@xxxxxxx, buskatiers@xxxxxxxxxxxxxx Sent: Friday, March 27, 2009 12:45:39 PM GMT -06:00 US/Canada Central Subject: [tcb] Re: 6 volt wiper motor, 12V system You expect us to play a game without knowing what the prize is??? As long as it's not a big sloppy kiss from an old hippy dude... Sorry, I don't have an answer. Creepy. Ha! Denis wrote: > In an attempt to fix my windshield wiper motor (which turned out not > to be the one that goes to a '63. The one I took out had 5 terminals) > I broke it. I got another one with only two terminals which means it > has one speed. Tark, who is doing all new electricals, wants to use a > two speed switch.> > So, here are the questions; what resistor do we put in the system to> allow 12 volts to run a 6 volt motor? And how and what resistors do we > use to create 2 speeds? I want the answers to be available at Autozone > or Radio Shack type places, not some expensive kit online, unless that > proves to be the only way.> > I'm going over to Vintagebus to ask the same questions. > > There will be a prize.