----- Original Message ----- From: "Malcolm Parfitt" <malcolm@xxxxxxxxxxxxxxx>
To: <bardiazakeri@xxxxxxxxx> Sent: Wednesday, July 21, 2010 3:57 PM Subject: Configure Talks.
HiFirstly I hope you will not mind my writing to you off list but the Talks UKlist does not accept posts from my domain.It is possible to configure Talks not to say the name of your provider, theword text and the text status. Firstly at the main standby screen do the following: Enter the Object viewer Talks and long select. Arrow down until Talks says Title>provider. Press Select. Arrow down to Role. Press Select. From the list of available role types choose ignore. If you exit the Object Viewer you should find that your provider's name is no longer spoken. Enter some digits to bring up the telephone screen. Repeat the steps above to suppress the provider being spoken at the telephone screen. Still at the telephone screen go into the Talks settings screen. Navigate to the Dictionary tab. Create an entry with the word text replaced by an empty string (enternothing as the replacement). Ensure that this is applied for the telephonescreen only!! Create an application setting at the telephone screen with verbose descriptions set to no.Lastly create an application setting for the telephone screen with read textstatus as no. This should vastly reduce the amount that Talks says when entering numbers at the telephone screen. Try the above and if you wish feel free to post them to the list. Any questions or comments don't hesitate to contact me. Malcolm__________ Information from ESET Smart Security, version of virus signaturedatabase 5297 (20100721) __________ The message was checked by ESET Smart Security. http://www.eset.com