That's PEP data -- I see fr re-reading this entire thread you're using
motors I'm, which I've never tried.
On Sunday, April 26, 2020, Nikolai Nielsen <nielsen.nikolai86@xxxxxxxxx>
wrote:
not sure what to make of that. im looking for data like this</mail/u/0/s/?view=att&th=171b916c5843c1c4&attid=0.1&disp=emb&realattid=ii_k9hrcep30&zw&atsh=1>
Nikolai Nielsen-1759 .0549]
On Mon, 27 Apr 2020 at 02:26, DH Barr <dhbarr@xxxxxxxxx> wrote:
I have
1181 XYLITOL 5C 12H 5O 0 0 0
wrote:
On Sunday, April 26, 2020, Nikolai Nielsen <nielsen.nikolai86@xxxxxxxxx>
as the fuelalso, does anyone have the burn data for xylitol? id like to use that
nielsen.nikolai86@xxxxxxxxx> wrote:Nikolai Nielsen
On Sun, 26 Apr 2020 at 18:13, Nikolai Nielsen <
the analog? could it be closer to the schedule 80?
im using motorsim, would it just be safe to use the schedule 40 as
nielsen.nikolai86@xxxxxxxxx> wrote:Nikolai Nielsen
On Sun, 26 Apr 2020 at 18:10, Nikolai Nielsen <
unfortunately. im just looking for a rough guideline so i can design
i dont have any of the sort of equipment to do any of that
wrote:Nikolai Nielsen
On Sun, 26 Apr 2020 at 18:07, Ray Rocket <dmarc-noreply@xxxxxxxxxxxxx>
due to the axial alignment of grain boundaries during the forming process.
Note that extruded tubing may not develop a very high hoop strength
doing this on homebrew motor cases anyway. A hydro test is easy and cheapBuild a test motor case and run a hydrostatic test. You should be
begins (say the case begins to stretch just before a tear in the wallIt is dangerous to test with air in the system. When a failure
nielsen.nikolai86@xxxxxxxxx> wrote:Ad Astra,
Ray
On Sunday, April 26, 2020, 09:38:50 AM MDT, Nikolai Nielsen <
aluminium pipe that used to be a tv antenna pole. I want to take a piece to
i want to get back into rocketry and ive got a 2m pole of extruded
much appreciated.
Nikolai Nielsen