Neal: Yes, my sounds are working. That would have been too simple, wouldn't it? Kim ------------------------------ On Mon, Nov 19, 2012 1:33 PM CST Neal Ewers wrote: >One other question. > >Do your system sounds still play? > >Neal > > > >-----Original Message----- >From: studiorecorder-bounce@xxxxxxxxxxxxx >[mailto:studiorecorder-bounce@xxxxxxxxxxxxx] On Behalf Of Neal Ewers >Sent: Monday, November 19, 2012 1:32 PM >To: studiorecorder@xxxxxxxxxxxxx >Subject: [studiorecorder] Re: invalid wave file/how to change this > >Kimberly. A few questions. > >First. Is this how it was set when you started recording this morning? > >Second. How were your recording, microphone, line in, etc.? > >Third. If you were using an external USB sound card or one connected to the >computer in some way, might it have become disconnected? > >Four. What sample rate and bit rate were you using? > >Five. Have you tried rebooting your computer? > >Neal > > > > >-----Original Message----- >From: studiorecorder-bounce@xxxxxxxxxxxxx >[mailto:studiorecorder-bounce@xxxxxxxxxxxxx] On Behalf Of Kimberly Morrow, >PhD. >Sent: Monday, November 19, 2012 1:26 PM >To: studiorecorder@xxxxxxxxxxxxx >Subject: [studiorecorder] Re: invalid wave file/how to change this > > > >Hello Neal: I did as you instructed. All options are set to Microsoft Sound >Mapper. It still doesn't work; still saying invalid wave device. What next? >I can't imagine why it suddenly began doing this out of the clear blue sky! > >Kimberly > > > >------------------------------ >On Mon, Nov 19, 2012 1:18 PM CST Neal Ewers wrote: > >>Hi Kimberly, open SR and press control plus w to get to the place you >>select the play and record devices you use. Make sure the correct one >>is listed. If not, change it to the correct one. If it still doesn't >>work, >let us know. >> >>Neal >> >> >>-----Original Message----- >>From: studiorecorder-bounce@xxxxxxxxxxxxx >>[mailto:studiorecorder-bounce@xxxxxxxxxxxxx] On Behalf Of Kimberly >>Morrow, PhD. >>Sent: Monday, November 19, 2012 1:13 PM >>To: studiorecorder@xxxxxxxxxxxxx >>Subject: [studiorecorder] invalid wave file/how to change this >> >> >> >>I'm hoping someone will know how to resolve this issue. I have been >>recording a document all morning. I saved it as a .wav file. Then I >>went to resume recording. It now says that I have an invalid wave >>device--whatever that might mean. I completely exited the program, >>rebooted my computer, and re-entered Studio Recorder. Then I tried both >>recording in my original document and then recording in a new document. >>When I press f6, it will not allow me to record; it says invalid .wav >device. How can I fix this? >> >>Thanks, >> >>Kimberly >> >> >> > > > >