[studiorecorder] Re: invalid wave file/how to change this

  • From: "Kimberly Morrow, PhD." <morrowmediakc@xxxxxxxxx>
  • To: studiorecorder@xxxxxxxxxxxxx
  • Date: Mon, 19 Nov 2012 11:57:29 -0800 (PST)


All of my previously recorded files give me this message.



------------------------------
On Mon, Nov 19, 2012 1:55 PM CST Neal Ewers wrote:

>Hi Kimberly, I was attempting to discover if you could open files you had
>recorded earlier other than the one with which you are having problems. I'm
>trying to figure out if there is something wrong with this file, or if all
>of your previously recorded files give you the same message.
>
>Neal
>
>
>
>-----Original Message-----
>From: studiorecorder-bounce@xxxxxxxxxxxxx
>[mailto:studiorecorder-bounce@xxxxxxxxxxxxx] On Behalf Of Kimberly Morrow,
>PhD.
>Sent: Monday, November 19, 2012 1:52 PM
>To: studiorecorder@xxxxxxxxxxxxx
>Subject: [studiorecorder] Re: invalid wave file/how to change this
>
>
>
>Yes--all files I attempt to record in give me this same invalid wave device
>message.
>
>Kim
>
>
>
>------------------------------
>On Mon, Nov 19, 2012 1:38 PM CST Neal Ewers wrote:
>
>>Kimberly, Can you open other files OK, or do all of them give you this
>>message?
>>
>>Neal
>>
>>
>>-----Original Message-----
>>From: studiorecorder-bounce@xxxxxxxxxxxxx
>>[mailto:studiorecorder-bounce@xxxxxxxxxxxxx] On Behalf Of Kimberly Morrow,
>>PhD.
>>Sent: Monday, November 19, 2012 1:37 PM
>>To: studiorecorder@xxxxxxxxxxxxx
>>Subject: [studiorecorder] Re: invalid wave file/how to change this
>>
>>
>>
>>
>>
>>Let me answer within your message, Neal:
>>------------------------------
>>On Mon, Nov 19, 2012 1:31 PM CST Neal Ewers wrote:
>>
>>Kimberly. A few questions.
>>
>>First. Is this how it was set when you started recording this morning? So
>>far as I know; I confess to not checking before I began. It was working
>>initially. But I've now tried experimenting by placing it on other settings
>>(speakers, Etc.), and I still get the invalid wave device prompt. 
>>
>>Second. How were your recording, microphone, line in, etc.? Again,
>>something I didn't check. I always just left everything the way it was
>>initially and I never had a problem--well, 'til now!
>>
>>Third. If you were using an external USB sound card or one connected to 
>>the computer in some way, might it have become disconnected? If the sound
>>card within the computer were disconnected, I would think I wouldn't have
>>any speech emitting from my speakers.
>>
>>Four. What sample rate and bit rate were you using?I used the default
>>settings.
>>
>>Five. Have you tried rebooting your computer? Oh yes--three times! I
>>completely shut down and started over. Still, I get the invalid wave device
>>prompt.
>>
>>Kimberly
>>
>>Neal
>>
>>
>> 
>>
>>-----Original Message-----
>>From: studiorecorder-bounce@xxxxxxxxxxxxx
>>[mailto:studiorecorder-bounce@xxxxxxxxxxxxx] On Behalf Of Kimberly 
>>Morrow, PhD.
>>Sent: Monday, November 19, 2012 1:26 PM
>>To: studiorecorder@xxxxxxxxxxxxx
>>Subject: [studiorecorder] Re: invalid wave file/how to change this
>>
>>
>>
>>Hello Neal: I did as you instructed. All options are set to Microsoft 
>>Sound Mapper. It still doesn't work; still saying invalid wave device.
>What
>>next?
>>I can't imagine why it suddenly began doing this out of the clear blue
>sky!
>>
>>Kimberly
>>
>>
>>
>>------------------------------
>>On Mon, Nov 19, 2012 1:18 PM CST Neal Ewers wrote:
>>
>>Hi Kimberly, open SR and press control plus w to get to the place you 
>>select the play and record devices you use. Make sure the correct one 
>>is listed. If not, change it to the correct one. If it still doesn't 
>>work,
>>let us know.
>>
>>Neal
>>
>>
>>-----Original Message-----
>>From: studiorecorder-bounce@xxxxxxxxxxxxx
>>[mailto:studiorecorder-bounce@xxxxxxxxxxxxx] On Behalf Of Kimberly 
>>Morrow, PhD.
>>Sent: Monday, November 19, 2012 1:13 PM
>>To: studiorecorder@xxxxxxxxxxxxx
>>Subject: [studiorecorder] invalid wave file/how to change this
>>
>>
>>
>>I'm hoping someone will know how to resolve this issue. I have been 
>>recording a document all morning. I saved it as a .wav file. Then I 
>>went to resume recording. It now says that I have an invalid wave 
>>device--whatever that might mean. I completely exited the program, 
>>rebooted my computer, and re-entered Studio Recorder. Then I tried 
>>both recording in my original document and then recording in a new
>>document.
>>When I press f6, it will not allow me to record; it says invalid .wav
>>device. How can I fix this?
>>
>>Thanks,
>>
>>Kimberly
>>
>>
>>
>>
>>
>>
>>
>>
>>
>
>
>

Other related posts:

  1. Home
  2. studiorecorder
  3. Archive
  4. 11-2012