[studiorecorder] Re: Latest Beta
- From: "Larry Johnson" <larjo1@xxxxxxxxxxx>
- To: <studiorecorder@xxxxxxxxxxxxx>
- Date: Mon, 27 Jun 2005 19:36:51 -0500
Rob,
A question for you from San Antonio:
How can I use Studio Recorder to record a program segment from and audio
link on the Internet?
Larry
----- Original Message -----
From: ROB MEREDITH
To: studiorecorder@xxxxxxxxxxxxx
Sent: Monday, June 27, 2005 1:18 PM
Subject: [studiorecorder] Re: Latest Beta
It would be great if you could post the steps required to freeze it up!
We haven't seen this. I also don't understand why you can't paste to a
new window twice.
Rob Meredith
>>> snapp@xxxxxxxxxxxxxxxxxxx 06/27/05 01:49PM >>>
Thanks for the great and prompt reply. You're right in what you say.
But, the cut and paste does work from time to time. I am using strictly
mono files at 44 MHZ. The fact that it works at times and does not work
at other times negates the actual differences in file types.
Additionally, cutting and pasting within a file also freezes up after
several such cycles. In this case, it is totally impossible for the
file types to be different. Or, am I missing something?
Even using control+D to paste the cut into another window then pasting
that into a third document witch is otherwise blank does not work.
Other than that, a wonderful program that is a pleasure to use. I
appreciate the opportunity to work with it.
Dick, Donna, Clayton, Mizzy, Bart and Ginger
----- Original Message -----
From: ROB MEREDITH
To: studiorecorder@xxxxxxxxxxxxx
Sent: Monday, June 27, 2005 10:19 AM
Subject: [studiorecorder] Re: Latest Beta
Hello:
I can explain your cut and paste problem. You can't paste the
clipboard
into a document which is of a different format then the data on the
clipboard. So, if you have two files and one is stereo while the
other
is mono, the paste will be rejected.
There is a neat little command on the Edit menu, Paste To New
Window,
which always works for pasting the clipboard. It creates a window
which
is the same format as the data on the clipboard, but it might not
help
much in your situation.
Note that you might want to set your default wave format to the kind
of
files you normally work with. For example, if your existing files
are
all 44,100 16-bit stereo, you can configure Studio Recorder to use
this
format for all new files by selecting Default Wave Format in the
Options
menu. Then, you can paste multiple parts of your existing files into
one
file in Studio Recorder.
Rob Meredith
>>> snapp@xxxxxxxxxxxxxxxxxxx 06/27/05 01:00PM >>>
Hello. I had downloaded the Beta of Studio Recorder at least two
weeks ago by first signing up for this email list as requested in
the
beta procedure. This is the first email I have received and I was
wondering if I had neglected to do something which was preventing
emails
from coming.
I cannot answer the question directly as I have never used Studio
Recorder before. It is a truly awesome program in many respects.
In
saying this, I am comparing it with Gold Wave versions 4.6 to 5.9.
My only problem with Studio Recorder is in cutting and pasting.
When
the first few cuts and pastes take place, everything is fine.
Especially if I am cutting and pasting in the same file. When I
attempt
to transfer material from one wav file to another, I often get a
message
that the file types are not compatible. If I reboot the computer
and
again launch Studio Recorder, the cut and paste process again works
well
for a few cycles before the problem comes up again. I'm using a 2,2
gig
machine with windows XP, and a gig of ram and internal 80 meg hard
drive
with external 80 gig hard drive. Again, a most wonderful product. It
is
a pleasure working with you and it.
Dick, Donna, Clayton, Mizzy, Bart and Ginger
----- Original Message -----
From: ROB MEREDITH
To: studiorecorder@xxxxxxxxxxxxx
Sent: Monday, June 27, 2005 7:44 AM
Subject: [studiorecorder] Latest Beta
Does anyone have any comments on the latest beta? Better? Worse?
No
noticeable difference? We are planning a release soon.
Rob Meredith
--
No virus found in this incoming message.
Checked by AVG Anti-Virus.
Version: 7.0.323 / Virus Database: 267.8.1/28 - Release Date:
6/24/2005
--
No virus found in this incoming message.
Checked by AVG Anti-Virus.
Version: 7.0.323 / Virus Database: 267.8.1/28 - Release Date:
6/24/2005
Other related posts:
