Hi , we are designing a Communication system (Microprocessor , VHF Transceiver , Clock circuitry , digital logic & etc). We are seeing some peak currents at power on for few tens of microsec.We are seeing about 900 mA of current at the power on before it settles to normal levels. where as in normal operation we are seeing about 200 mA which is correct. Pls see if you any inputs to mitigate this effect apart from using some Inductors in the input supply path. regards Sunil bharadwaz. ------------------------------------------------------------------ To unsubscribe from si-list: si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field or to administer your membership from a web page, go to: //www.freelists.org/webpage/si-list For help: si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field List technical documents are available at: http://www.si-list.net List archives are viewable at: //www.freelists.org/archives/si-list or at our remote archives: http://groups.yahoo.com/group/si-list/messages Old (prior to June 6, 2001) list archives are viewable at: http://www.qsl.net/wb6tpu