Your question is very fundamental. What have you done to try and learn about the subject? Steve. Mohamed Ali Gazi wrote: > Dear Experts, > I understood from some of the materials that the trace length between the > driver to receiver ( signal path + return path) should be less than the rise > time. Is my understanding correct? > > For example if the rise time of a signal is 1ns then the signal trace length > should be less than 3 inches( signal trace length 3 inches and return path 3 > inches totally 6 inches = 1 ns of signal travel delay which is equal to rise > time of the signal) > > If my understanding is wrong can anybody please provide me with some > materials to understand it. Sorry if this is bit basic question. > > Thank you very much. > Mohamed Ali > > > ------------------------------------------------------------------ > To unsubscribe from si-list: > si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field > > or to administer your membership from a web page, go to: > //www.freelists.org/webpage/si-list > > For help: > si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field > > > List technical documents are available at: > http://www.si-list.net > > List archives are viewable at: > //www.freelists.org/archives/si-list > > Old (prior to June 6, 2001) list archives are viewable at: > http://www.qsl.net/wb6tpu > > > > ------------------------------------------------------------------ To unsubscribe from si-list: si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field or to administer your membership from a web page, go to: //www.freelists.org/webpage/si-list For help: si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field List technical documents are available at: http://www.si-list.net List archives are viewable at: //www.freelists.org/archives/si-list Old (prior to June 6, 2001) list archives are viewable at: http://www.qsl.net/wb6tpu