I design a board . There are 6 Gigabit ports (1000base-T) on it. And = there is no problem to send packets to smartbits . But when smartbit = sends packets to these Gigabit ports, there are a lot of error packets = received by these ports . Could anyone give me some help ? =20 And I want to know if Pulse transformer 5054 is for 10/100/1000 base-T = ? =20 =20 Thanks! ------------------------------------------------------------------ To unsubscribe from si-list: si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field or to administer your membership from a web page, go to: //www.freelists.org/webpage/si-list For help: si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field List FAQ wiki page is located at: http://si-list.org/wiki/wiki.pl?Si-List_FAQ List technical documents are available at: http://www.si-list.org List archives are viewable at: //www.freelists.org/archives/si-list or at our remote archives: http://groups.yahoo.com/group/si-list/messages Old (prior to June 6, 2001) list archives are viewable at: http://www.qsl.net/wb6tpu