[SI-LIST] bidirectional line driver needed
- From: "Nico Fleurinck" <nico.fleurinck@xxxxxxxxxxxx>
- To: "'compactPCI (E-mail)'" <pci-all-request@xxxxxxxx>,"'si-list'" <si-list@xxxxxxxxxxxxx>
- Date: Fri, 17 Jan 2003 12:02:05 +0100
Dear experts,
For a project I'm currently working on I need have a component or components
to make a bidirectional line.
I don't have a direction control signal for those line, so a transceiver
(with direction control) is not a solution.
The reason I need this is to have the possibility to desite during testing
that sone parallel I/O signals or input OR output.
For example: during test 1 is PIO1 an input and during test 2 it is an
output, do you understand?
If you have a solution for my problem please let me know.
The signals are slow changing signals, so no high speed lines!!!
The PIO's will be only used during debugging and testing of the system.
Best regards,
Nico
Nico Fleurinck
Junior Design Engineer
VERHAERT Satellites & Platforms
Hogenakkerhoekstraat 21
B-9150 Kruibeke
Tel : +32 3 250.1984
Fax : +32 3 254.1008
e-mail : nico.fleurinck@xxxxxxxxxxxx
Visit us : www.verhaert.com
------------------------------------------------------------------
To unsubscribe from si-list:
si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field
or to administer your membership from a web page, go to:
//www.freelists.org/webpage/si-list
For help:
si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field
List archives are viewable at:
//www.freelists.org/archives/si-list
or at our remote archives:
http://groups.yahoo.com/group/si-list/messages
Old (prior to June 6, 2001) list archives are viewable at:
http://www.qsl.net/wb6tpu
Other related posts:
