[SI-LIST] Re: ac drive strength
- From: "Beal, Weston" <weston_beal@xxxxxxxxxxx>
- To: "'si-list@xxxxxxxxxxxxx'" <si-list@xxxxxxxxxxxxx>
- Date: Thu, 26 Jul 2001 13:56:55 -0700
Michael,
In the interest of time, I would run with the IBIS files. IBIS 3.2 specifies a
Series_switch model_type for defining series MOSFETs like this. Ask your AE of
you favorite simulator that supports IBIS if they can simulate this feature. I
know that at least one tool does. :)
Later,
Weston
-----Original Message-----
From: Greim, Michael [mailto:mgreim@xxxxxxxxxxxx]
Sent: Thursday, July 26, 2001 1:14 PM
To: 'si-list@xxxxxxxxxxxxx'
Subject: [SI-LIST] Re: ac drive strength
Hi All,
I had a silly question that I wanted to throw
out to the group in an effort to save time. I
am looking to perform an end to end sim where I
have two components, a quick switch and a connector.
The quick switch sits between the driver and the
connector. I have ibis models for the parts and
can not get spice models in the time frame that I
would need them. I have single line models for
the connector. So, would I be better off bringing
the driver and receiver models into hspice or per
form the sim in the ibis domain? Is there an
equivalent circuit model for the quickswitch? I
noticed that there were rev 2.1 ibis models on the
IDT site (formerly quality semi) but I didn't recall
being able to sim through a device like this. If
not, what are these models for.
Thanks for the help.
Michael Greim
------------------------------------------------------------------
To unsubscribe from si-list:
si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field
For help:
si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field
List archives are viewable at:
//www.freelists.org/archives/si-list
or at our remote archives:
http://groups.yahoo.com/group/si-list/messages
Old (prior to June 6, 2001) list archives are viewable at:
http://www.qsl.net/wb6tpu
------------------------------------------------------------------
To unsubscribe from si-list:
si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field
For help:
si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field
List archives are viewable at:
//www.freelists.org/archives/si-list
or at our remote archives:
http://groups.yahoo.com/group/si-list/messages
Old (prior to June 6, 2001) list archives are viewable at:
http://www.qsl.net/wb6tpu
Other related posts:
