If you are still looking for P0/1/2 connector models. Contact Harting for their appliction which can generate the appropriate models. It actually allows you to generate the model based on your pin out configuration and I remember generating a MLM model. You will have to sign some NDA to get it though. Regards, ***** Hi all, I was searching for SLM models for the VME P0, P1, P2 connectors but could not locate any from the manufacturers(Harting) site. Where can i locate these models? Also do the model parameters vary for different manufacturers? Regards ------------------------------------------------------------------ To unsubscribe from si-list: si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field or to administer your membership from a web page, go to: //www.freelists.org/webpage/si-list For help: si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field List FAQ wiki page is located at: http://si-list.org/wiki/wiki.pl?Si-List_FAQ List technical documents are available at: http://www.si-list.org List archives are viewable at: //www.freelists.org/archives/si-list or at our remote archives: http://groups.yahoo.com/group/si-list/messages Old (prior to June 6, 2001) list archives are viewable at: http://www.qsl.net/wb6tpu