[SI-LIST] Re: VME connector models
- From: "Mike Greim" <mike.greim@xxxxxxxxxxx>
- To: <weirsi@xxxxxxxxxx>, <esayre@xxxxxxxx>, <jackie1234@xxxxxxxxx>, <si-list@xxxxxxxxxxxxx>
- Date: Mon, 29 Aug 2005 16:59:18 -0500
Hey,
I'm just a facilitator of enablement.
I've seen folks try to do a whole lot
more with a whole lot less. That's what
keeps the whole SI consulting community=20
chugging along. That and rules of thumb,
of course......
Obligatory blanket......8-)
Michael
-----Original Message-----
From: si-list-bounce@xxxxxxxxxxxxx
[mailto:si-list-bounce@xxxxxxxxxxxxx]On Behalf Of steve weir
Sent: Monday, August 29, 2005 4:55 PM
To: Mike Greim; esayre@xxxxxxxx; jackie1234@xxxxxxxxx;
si-list@xxxxxxxxxxxxx
Subject: [SI-LIST] Re: VME connector models
Ah the venerable 41612. With the scarcity of returns, I don't think an =
SLM=20
is going to be that useful.
Steve.
At 04:51 PM 8/29/2005 -0500, Mike Greim wrote:
>Looks like Ed is right. It's been
>quite a while, but if I recall correctly,
>the connector your looking for is a=3D20
>DIN 41612. You can select it from the
>following menu, and either grab a SLM=3D20
>or order an MLM model. =3D20
>
>http://www.tycoelectronics.com/products/simulation/scripts/models.asp
>
>Best Regards,
>
>Michael Greim
>Platform Engineering
>Newisys, Inc.
>512-340-9050, ext 232 (V)
>512-740-9097 (C)
>
>We will either find a way or make one -Hannibal
>
>And all this science they don't understand
>is just my job six days a week........
>
>The time is gone, the email's over
>Thought I'd something more to say.......
>
>
>-----Original Message-----
>From: si-list-bounce@xxxxxxxxxxxxx
>[mailto:si-list-bounce@xxxxxxxxxxxxx]On Behalf Of Dr. Edward P. Sayre
>Sent: Monday, August 29, 2005 4:45 PM
>To: jackie1234@xxxxxxxxx; si-list@xxxxxxxxxxxxx
>Subject: [SI-LIST] Re: VME connector models
>
>
>Surjendra:
>
>Way back when they invented VME, it didn't go fast enough for anyone =
to=3D20
>care about modeling or SI or for that matter signaling problems except =
=3D
>EMI.=3D20
>Its a long shot, but tyco/AMP might have something tucked away =
somewhere =3D
>in=3D20
>the way of VME SPICE circuit models. Remember, VME has a strange =3D
>grounding=3D20
>pattern and if the models reflect that pattern, they will be hard to =
use =3D
>
>for anything else. If they are non-specific pin to pin models, =
then=3D20
>imposing grounded pin constraints is straight forward.
>
>Sincerely,
>
>ed
>=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D=
3D
>At 01:19 PM 8/26/2005 +0530, Surjendra Goswami wrote:
> >Hi all,
> >I was searching for SLM models for the VME P0, P1, P2 connectors but
> >could not locate any from the manufacturers(Harting) site. Where can
> >i locate these models?
> >Also do the model parameters vary for different manufacturers?
> >
> >Regards
> >------------------------------------------------------------------
> >To unsubscribe from si-list:
> >si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field
> >
> >or to administer your membership from a web page, go to:
> >//www.freelists.org/webpage/si-list
> >
> >For help:
> >si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field
> >
> >List FAQ wiki page is located at:
> > http://si-list.org/wiki/wiki.pl?Si-List_FAQ
> >
> >List technical documents are available at:
> > http://www.si-list.org
> >
> >List archives are viewable at:
> > //www.freelists.org/archives/si-list
> >or at our remote archives:
> > http://groups.yahoo.com/group/si-list/messages
> >Old (prior to June 6, 2001) list archives are viewable at:
> > http://www.qsl.net/wb6tpu
> >
> >
> >
> >!DSPAM:430ecfdf60951719936846!
>
>
>
>
>+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~+
>| NORTH EAST SYSTEMS ASSOCIATES, INC. |
>| ------------------------------------- |
>| "High Performance Engineering & Design" |
>+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~+
>| Dr. Ed Sayre e-mail: esayre@xxxxxxxx|
>| NESA, Inc. http://www.nesa.com/ |
>| 235 Littleton Road, Ste 2 Tel +1.978.392-8787 |
>| Westford, MA 01886 Fax +1.978.392-8686 |
>+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~+
>
>------------------------------------------------------------------
>To unsubscribe from si-list:
>si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field
>
>or to administer your membership from a web page, go to:
>//www.freelists.org/webpage/si-list
>
>For help:
>si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field
>
>List FAQ wiki page is located at:
> http://si-list.org/wiki/wiki.pl?Si-List_FAQ
>
>List technical documents are available at:
> http://www.si-list.org
>
>List archives are viewable at: =3D20
> //www.freelists.org/archives/si-list
>or at our remote archives:
> http://groups.yahoo.com/group/si-list/messages
>Old (prior to June 6, 2001) list archives are viewable at:
> http://www.qsl.net/wb6tpu
> =3D20
>
>------------------------------------------------------------------
>To unsubscribe from si-list:
>si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field
>
>or to administer your membership from a web page, go to:
>//www.freelists.org/webpage/si-list
>
>For help:
>si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field
>
>List FAQ wiki page is located at:
> http://si-list.org/wiki/wiki.pl?Si-List_FAQ
>
>List technical documents are available at:
> http://www.si-list.org
>
>List archives are viewable at:
> //www.freelists.org/archives/si-list
>or at our remote archives:
> http://groups.yahoo.com/group/si-list/messages
>Old (prior to June 6, 2001) list archives are viewable at:
> http://www.qsl.net/wb6tpu
>
------------------------------------------------------------------
To unsubscribe from si-list:
si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field
or to administer your membership from a web page, go to:
//www.freelists.org/webpage/si-list
For help:
si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field
List FAQ wiki page is located at:
http://si-list.org/wiki/wiki.pl?Si-List_FAQ
List technical documents are available at:
http://www.si-list.org
List archives are viewable at: =20
//www.freelists.org/archives/si-list
or at our remote archives:
http://groups.yahoo.com/group/si-list/messages
Old (prior to June 6, 2001) list archives are viewable at:
http://www.qsl.net/wb6tpu
=20
------------------------------------------------------------------
To unsubscribe from si-list:
si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field
or to administer your membership from a web page, go to:
//www.freelists.org/webpage/si-list
For help:
si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field
List FAQ wiki page is located at:
http://si-list.org/wiki/wiki.pl?Si-List_FAQ
List technical documents are available at:
http://www.si-list.org
List archives are viewable at:
//www.freelists.org/archives/si-list
or at our remote archives:
http://groups.yahoo.com/group/si-list/messages
Old (prior to June 6, 2001) list archives are viewable at:
http://www.qsl.net/wb6tpu
Other related posts:
