Dear all, I have read some articles about trace bend on printed circuit board and I have basic idea about the effect of trace bends. I would like to know more about this topic. Hope someone can help. (1) Will the trace bend gives significant electromagnetic radiation? (2) How significant is the impedance discontinuity at the bends in actual PCB design? (3) How the sharp bends (90 degree or 45 degree) affect the skin effect? (4) Is there any good article, paper or book about this subject? Thank you very much in advance. -- Rgds, Chai _________________________________________________________________ Chat with friends online, try MSN Messenger: http://messenger.msn.com ------------------------------------------------------------------ To unsubscribe from si-list: si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field or to administer your membership from a web page, go to: //www.freelists.org/webpage/si-list For help: si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field List archives are viewable at: //www.freelists.org/archives/si-list or at our remote archives: http://groups.yahoo.com/group/si-list/messages Old (prior to June 6, 2001) list archives are viewable at: http://www.qsl.net/wb6tpu