Hi All, some rules of route to route spacing are mostly followed by high speed board designers as w, 2w, 3w where w is actual trace width and the spacing reduces for syncronous signals as like for data lines and address line the spacing will be kept equal to the trace width = w and for other async. signals it goes on increasing by 2w and 3w rule but in the calculation of the cross talk trace width is not considered why is it so..........? please explain thanks in advance rgds kedar ------------------------------------------------------------------ To unsubscribe from si-list: si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field or to administer your membership from a web page, go to: //www.freelists.org/webpage/si-list For help: si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field List FAQ wiki page is located at: http://si-list.org/wiki/wiki.pl?Si-List_FAQ List technical documents are available at: http://www.si-list.org List archives are viewable at: //www.freelists.org/archives/si-list or at our remote archives: http://groups.yahoo.com/group/si-list/messages Old (prior to June 6, 2001) list archives are viewable at: http://www.qsl.net/wb6tpu