[SI-LIST] Re: Series termination and damping resistors
- From: Cuong Nguyen <cuong@xxxxxxxxxxxxx>
- To: "aaditya.kandibanda@xxxxxxxxx" <aaditya.kandibanda@xxxxxxxxx>
- Date: Tue, 3 Jul 2012 15:38:18 -0700
Simulate the topology and pick the right value... :)
Sent from my iPhone
On Jul 3, 2012, at 3:00 PM, Aaditya Kandibanda <aaditya.kandibanda@xxxxxxxxx>
wrote:
> I am not sure but I think damping resistor is used to reduce the amplitude
> of ringing and termination resistors are used to absorb the energy from
> source.
>
>
>
>
> On Tue, Jul 3, 2012 at 9:45 AM, steve weir <weirsi@xxxxxxxxxx> wrote:
>
>> A series damping resistor is any series resistor of any value placed
>> anywhere in the line to dissipate reflections A series terminating
>> resistor is a resistor placed at the transmit end of the line where the
>> resistor value approximates the difference between the TX line
>> characteristic impedance and the driver V/I load line characteristic.
>>
>> Steve.
>> On 7/3/2012 8:55 AM, Jason Young wrote:
>>> Dear experts,
>>> Is a "series terminating resistor" the same as a "series damping
>> resistor"?
>>> Regards,
>>> Jason
>>>
>>> ------------------------------------------------------------------
>>> To unsubscribe from si-list:
>>> si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field
>>>
>>> or to administer your membership from a web page, go to:
>>> //www.freelists.org/webpage/si-list
>>>
>>> For help:
>>> si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field
>>>
>>>
>>> List forum is accessible at:
>>> http://tech.groups.yahoo.com/group/si-list
>>>
>>> List archives are viewable at:
>>> //www.freelists.org/archives/si-list
>>>
>>> Old (prior to June 6, 2001) list archives are viewable at:
>>> http://www.qsl.net/wb6tpu
>>>
>>>
>>>
>>
>>
>> --
>> Steve Weir
>> IPBLOX, LLC
>> 150 N. Center St. #211
>> Reno, NV 89501
>> www.ipblox.com
>>
>> (775) 299-4236 Business
>> (866) 675-4630 Toll-free
>> (707) 780-1951 Fax
>>
>> All contents Copyright (c)2012 IPBLOX, LLC. All Rights Reserved.
>> This e-mail may contain confidential material.
>> If you are not the intended recipient, please destroy all records
>> and notify the sender.
>>
>> ------------------------------------------------------------------
>> To unsubscribe from si-list:
>> si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field
>>
>> or to administer your membership from a web page, go to:
>> //www.freelists.org/webpage/si-list
>>
>> For help:
>> si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field
>>
>>
>> List forum is accessible at:
>> http://tech.groups.yahoo.com/group/si-list
>>
>> List archives are viewable at:
>> //www.freelists.org/archives/si-list
>>
>> Old (prior to June 6, 2001) list archives are viewable at:
>> http://www.qsl.net/wb6tpu
>>
>>
>>
>
>
> ------------------------------------------------------------------
> To unsubscribe from si-list:
> si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field
>
> or to administer your membership from a web page, go to:
> //www.freelists.org/webpage/si-list
>
> For help:
> si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field
>
>
> List forum is accessible at:
> http://tech.groups.yahoo.com/group/si-list
>
> List archives are viewable at:
> //www.freelists.org/archives/si-list
>
> Old (prior to June 6, 2001) list archives are viewable at:
> http://www.qsl.net/wb6tpu
>
>
------------------------------------------------------------------
To unsubscribe from si-list:
si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field
or to administer your membership from a web page, go to:
//www.freelists.org/webpage/si-list
For help:
si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field
List forum is accessible at:
http://tech.groups.yahoo.com/group/si-list
List archives are viewable at:
//www.freelists.org/archives/si-list
Old (prior to June 6, 2001) list archives are viewable at:
http://www.qsl.net/wb6tpu
Other related posts:
