Or, one can create a PEC reference plane in modeling, so that power/ground port
measurements can be referenced to it. It's as valid as matrices with partial
inductance.
Scott McMorrow, CTO Signal Integrity Group
Samtec
Office 401-284-1827 | +1-800-726-8329
www.samtec.com<http://www.samtec.com/>
Scott McMorrow,
Office: 401-284-1827
www.samtec.com
This email and any appended documents are only for the intended person/entity
and may contain information of Samtec, Inc., that is PRIVILEGED, PROPRIETARY,
CONFIDENTIAL, AND/OR PROTECTED BY LAW. If you are not the intended recipient
you are hereby notified that any dissemination, disclosure, use or copying of
this email or its contents is prohibited. If you this message in error, please
notify Samtec immediately and delete the email, attachments and all copies. The
intended recipient should not disclose the content to third parties or
reproduce the content without Samtec's written consent.
delete the email, attachments and all copies. The intended recipient should
not disclose the content to third parties or reproduce the content without
Samtec's written consent.
------------------------------------------------------------------
To unsubscribe from si-list:
si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field
or to administer your membership from a web page, go to:
//www.freelists.org/webpage/si-list
For help:
si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field
List forum is accessible at:
http://tech.groups.yahoo.com/group/si-list
List archives are viewable at:
//www.freelists.org/archives/si-list
Old (prior to June 6, 2001) list archives are viewable at:
http://www.qsl.net/wb6tpu