Hi Edi, All of the major scope manufacturers should be able to accommodate your needs. For PCIe Gen 1, you will need at least 6 GHz of bandwidth. Many of the scopes have built in compliance applications that will "walk you through" making the measurements. Or you can always do it the old fashioned way of following the PCIe compliance documents on the PCISIG website. If are doing add-in card or motherboard PCIe slot compliance testing, the compliance load boards can be ordered through the PCISIG as well. http://www.pcisig.com/specifications/pciexpress/compliance/compliance_li brary Best of luck to you, Mike -----Original Message----- From: si-list-bounce@xxxxxxxxxxxxx [mailto:si-list-bounce@xxxxxxxxxxxxx] On Behalf Of Edi Fraiman Sent: Thursday, August 09, 2007 10:24 AM To: si-list@xxxxxxxxxxxxx Subject: [SI-LIST] PCIe Oscilloscope=20 Hello all, =20 Could you please suggest Oscilloscope model for testing and verifying that PCIe components have the correct transmitter eye diagram and signal amplitude required for interoperability. =20 =20 Best regards, =20 Edi Fraiman =20 =20 =20 ------------------------------------------------------------------ To unsubscribe from si-list: si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field or to administer your membership from a web page, go to: //www.freelists.org/webpage/si-list For help: si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field List technical documents are available at: http://www.si-list.net List archives are viewable at: =20 //www.freelists.org/archives/si-list or at our remote archives: http://groups.yahoo.com/group/si-list/messages Old (prior to June 6, 2001) list archives are viewable at: http://www.qsl.net/wb6tpu =20 ***************************************************************** ************* CONFIDENTIAL NOTE: This e-mail and any attachments may be confidential and protected by legal privilege. If you are not the intended recipient, be aware that you are hereby notified that any unauthorized review, use, disclosure, dissemination, distribution, or copying of this communication, or any of its contents, is strictly prohibited. If you have received this email in error, please notify us immediately by replying to the sender and deleting this copy and the reply from your system. Thank you for your cooperation. EXPORT CONTROLLED DOCUMENT This document may contain information whose export is restricted by the Arms Export Control Act (Title 22, U.S.C., Sec 2751 Et Seq.) or the Export Administration Act of 1979, as amended, (Title 50, U.S.C., App. 2401, Et. Seq.) Violations to these export laws are subject to severe criminal penalties. All technical data forwarded by VT Miltope to its suppliers is EXPORT CONTROLLED. Supplier shall not disclose technical data in any form to a Foreign Person (including foreign person employees of Supplier), or export the technical data from the United States without U.S. Government authority and the written authorization of VT Miltope Contracts Department. ***************************************************************** ************* ------------------------------------------------------------------ To unsubscribe from si-list: si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field or to administer your membership from a web page, go to: //www.freelists.org/webpage/si-list For help: si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field List technical documents are available at: http://www.si-list.net List archives are viewable at: //www.freelists.org/archives/si-list or at our remote archives: http://groups.yahoo.com/group/si-list/messages Old (prior to June 6, 2001) list archives are viewable at: http://www.qsl.net/wb6tpu