[SI-LIST] Re: PCB Trace Antenna
- From: "Boopathy J." <boopathy_j@xxxxxxxxxxxx>
- To: "Istvan Novak" <istvan.novak@xxxxxxx>
- Date: Thu, 22 Sep 2005 17:38:40 +0530
Dear Istvan,
I need to Create an PCB trace antenna of
F=13.5Mhz, Impedence=50 ohms, L=1.2uH.
Now I need to determine PCB trace length (end to end), width of the trace
etc. Is there is any calculator available to determine it?.
Right Now we have a plan to complete the placement & routing of the board
which will lie inside the loop antenna. Is it a right design to do it??
Otherwise, I need to Make two separate PCB (one for component & another one
for loop antenna).
Regards,
Boopathy J
-----Original Message-----
From: Istvan Novak [mailto:istvan.novak@xxxxxxx]
Sent: Thursday, September 22, 2005 5:19 PM
To: Boopathy J.
Cc: si-list@xxxxxxxxxxxxx
Subject: Re: [SI-LIST] PCB Trace Antenna
Boopathy,
Not knowing the RF system parameters you have
to achieve, just based on the stated frequency,
you probably want to create a tuned loop antenna.
In this case the trace impedance matters less,
in fact you may want to increase it as much
as possible. More will matter the size
(and orientation) of loop and the number of turns.
regards,
Istvan novak
SUN Microsystems
Boopathy J. wrote:
>Content-Type: text/plain;
> charset="us-ascii"
>Content-Transfer-Encoding: quoted-printable
>HI,
>
> We are designing HF card Reader at f =13.56MHZ.
>
>we need to implement the Antenna In PCB traces. As I haven't worked =
>much on
>
>RF PCB design, I would like to know how to implement it &
>
>how to determine the Trace length & impudence for 13.56MHz.
>
>=20
>
>=20
>
>Thanks In advance
>
>=20
>
>Regards,
>
>Boopathy J
>
>=20
>
>
>
>
>
-- Attached file included as plaintext by Ecartis --
-- File: disclaimer.txt
-----------------------------------------------------------------------------------------------------------------------------
Disclaimer
-----------------------------------------------------------------------------------------------------------------------------
"This message(including attachment if any)is confidential and may be
privileged.Before opening attachments please check them
for viruses and defects.MindTree Consulting Private Limited (MindTree)will not
be responsible for any viruses or defects or
any forwarded attachments emanating either from within MindTree or outside.If
you have received this message by mistake please notify the sender by return
e-mail and delete this message from your system. Any unauthorized use or
dissemination of this message in whole or in part is strictly prohibited.
Please note that e-mails are susceptible to change and MindTree shall not be
liable for any improper, untimely or incomplete transmission."
-----------------------------------------------------------------------------------------------------------------------------
------------------------------------------------------------------
To unsubscribe from si-list:
si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field
or to administer your membership from a web page, go to:
//www.freelists.org/webpage/si-list
For help:
si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field
List FAQ wiki page is located at:
http://si-list.org/wiki/wiki.pl?Si-List_FAQ
List technical documents are available at:
http://www.si-list.org
List archives are viewable at:
//www.freelists.org/archives/si-list
or at our remote archives:
http://groups.yahoo.com/group/si-list/messages
Old (prior to June 6, 2001) list archives are viewable at:
http://www.qsl.net/wb6tpu
Other related posts:
