[SI-LIST] PCB Trace Antenna
- From: dav0 <david.lieby@xxxxxxxxxxx>
- To: si-list@xxxxxxxxxxxxx
- Date: Thu, 22 Sep 2005 08:20:21 -0700
Hi folks,
I did a system for a remote control using several types of
radiation elements. It was hand held so the user interfered
a lot with some types. The best, on both ends, was a loop
around the periphery of the board, tuned to resonance with
a capacitor. Feeding the beast was fun, try different things,
like tapped capacitance works well.
The systems we did trying to use a 1/4 wave got too much
interference from the microprocessor on the receiving
system.
Good luck,
dav0
David Lieby
Siemens Med. USD, MVIS-S
Andrew Burnside wrote:
> Virenda
>
> Of course the dielectric underneath the antenna will effect your readings.
> If you think about the path of the current, then there will be associated
> field lines.
> If you cut these field lines with anything, then you will change the
> impedance.
------------------------------------------------------------------
To unsubscribe from si-list:
si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field
or to administer your membership from a web page, go to:
//www.freelists.org/webpage/si-list
For help:
si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field
List FAQ wiki page is located at:
http://si-list.org/wiki/wiki.pl?Si-List_FAQ
List technical documents are available at:
http://www.si-list.org
List archives are viewable at:
//www.freelists.org/archives/si-list
or at our remote archives:
http://groups.yahoo.com/group/si-list/messages
Old (prior to June 6, 2001) list archives are viewable at:
http://www.qsl.net/wb6tpu
Other related posts:
