Hi Kumar, This is not a good solution as the waveforms no more match! if I remove the VT tables. Regards, elechi On Fri, May 28, 2010 at 3:54 PM, C. Kumar <kumarchi@xxxxxxxxx> wrote: > viswanath: > you will save yourself lot of time by just removing the rising and falling > wave form tables. These tables were used to represent staged switching in > old cmos drivers. > At DDR3 speeds they are mainly legacy. > > ------------------------------ > *From:* Vishwanath Elechithaya <elechi@xxxxxxxxx> > *To:* si-list@xxxxxxxxxxxxx > *Sent:* Fri, May 28, 2010 4:47:27 AM > *Subject:* [SI-LIST] Looking for an algorithm to clip waveforms > > Hi All, > while generating models for a fast DDR3 Cell, I came across a problem of > over-clocked cell problem of the IBIS models not able to cope up the > frequency requirements. I came across some topics here about the time > shifting of the waveforms. I have tried out by manually clipping the > waveforms so as to match the spice w.r.t IBIS, with a bit of success. > however, the values for the clipping I am not able to put them in a > generalized algorithm for various over-clocked models. I hope that many of > you may have come accross this situation, and would like to know if any > algorithm exists or innovated to actually find the amount of clipping that > needs to be applied to the models. > Regards, > elechi > > > ------------------------------------------------------------------ > To unsubscribe from si-list: > si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field > > or to administer your membership from a web page, go to: > //www.freelists.org/webpage/si-list > > For help: > si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field > > > List technical documents are available at: > http://www.si-list.net > > List archives are viewable at: > //www.freelists.org/archives/si-list > > Old (prior to June 6, 2001) list archives are viewable at: > http://www.qsl.net/wb6tpu > > > > ------------------------------------------------------------------ To unsubscribe from si-list: si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field or to administer your membership from a web page, go to: //www.freelists.org/webpage/si-list For help: si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field List technical documents are available at: http://www.si-list.net List archives are viewable at: //www.freelists.org/archives/si-list Old (prior to June 6, 2001) list archives are viewable at: http://www.qsl.net/wb6tpu