Sorry if this seems a bit off-topic. Does anybody know of an inexpensive and easy-to-use TDR system that's good enough to localize PCB assembly shorts and open with accuracy that translates into about 1 inch on a trace? I'm trying to see if I can find something that can help out with the old "which chip to replace" problem during assembly debug as often BGA x-rays are ambiguous. Jerry Martinson ARUBA NETWORKS (work 408-754-3037) (cell 408-394-5185) jmartinson@xxxxxxxxxxxxxxxxx 1322 Crossman, Sunnyvale, CA 94089 ------------------------------------------------------------------ To unsubscribe from si-list: si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field or to administer your membership from a web page, go to: //www.freelists.org/webpage/si-list For help: si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field List technical documents are available at: http://www.si-list.net List archives are viewable at: //www.freelists.org/archives/si-list or at our remote archives: http://groups.yahoo.com/group/si-list/messages Old (prior to June 6, 2001) list archives are viewable at: http://www.qsl.net/wb6tpu