[SI-LIST] Re: IBIS Model error
- From: "Abe Riazi" <ariazi@xxxxxxxxxxxxxxx>
- To: "si-list@xxxxxxxxxxxxx" <si-list@xxxxxxxxxxxxx>
- Date: Mon, 17 Nov 2003 15:15:24 -0800
Jon Powell Wrote:
>
>
Anyway, I think we decided that MIN was fast
and MAX was slow (in general) and there are recommendations in the IBIS spec
on how to achieve this.
But I do agree that TYP should somehow be in between MIN and MAX.
jon
>
>
Hi Jon,
I find the statement "MIN was fast and MAX was slow" surprising.
I have been under the impression that MIN buffer is used for Slow corner
(or worst case), and MAX buffer applied for Fast corner (best case) simulations.
Best Regards,
Abe Riazi
ServerWorks
------------------------------------------------------------------
To unsubscribe from si-list:
si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field
or to administer your membership from a web page, go to:
//www.freelists.org/webpage/si-list
For help:
si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field
List technical documents are available at:
http:/www.si-list.org
List archives are viewable at:
//www.freelists.org/archives/si-list
or at our remote archives:
http://groups.yahoo.com/group/si-list/messages
Old (prior to June 6, 2001) list archives are viewable at:
http://www.qsl.net/wb6tpu
Other related posts:
