Jeff- It is some sort of resistive material that heats up when the microwaves impinge upon it. It absorbs the energy instead of reflecting it. I believe they call the coating a 'supsceptor'. <spelling??> -Ray -----Original Message----- From: si-list-bounce@xxxxxxxxxxxxx [mailto:si-list-bounce@xxxxxxxxxxxxx] On Behalf Of Loyer, Jeff Sent: Friday, November 14, 2014 3:51 PM To: Smith, Larry; si-list (si-list@xxxxxxxxxxxxx) Subject: [SI-LIST] Re: Honey, your conductors are ready! Good stuff Larry - thanks! What do you suppose they're putting in those chicken pot pie bowls? Can I try it with that stuff? Jeff Loyer -----Original Message----- From: Smith, Larry [mailto:larrys@xxxxxxxxxxxxxxxx] Sent: Saturday, November 15, 2014 7:45 AM To: Loyer, Jeff; si-list (si-list@xxxxxxxxxxxxx) Subject: RE: Honey, your conductors are ready! Hi Jeff - I really enjoyed your write up, it put a big smile on my face. But just a few comments. I'm not sure that the foil is going to get hot. A conductor is going to do a good job of reflecting and re-directing microwaves but it is not going to absorb a lot of energy. Certainly some eddy currents are going to flow just as they do any metal structure near a radiating source and this is going to cause some IR loss and power absorption. But mostly the energy is going to bounce around the oven and possibly do damage. The metal can concentrate fields. I once had a coffee cup with a gold plated design on it. The sparks flew! But I think most of the energy absorption in a microwave oven happens in the dielectric. Wikipedia makes a point that the polarized molecules in the food rotate and build up the thermal energy for heating. Water is a good example of that. Please see https://en.wikipedia.org/wiki/Microwave_oven . Further down in the article there is a section on metal objects, aluminum foil being one of them. A quote: "Aluminium foil is thick enough to be used in microwave ovens as a shield against heating parts of food items, if the foil is not badly warped. When wrinkled, aluminium foil is generally unsafe in microwaves, as manipulation of the foil causes sharp bends and gaps that invite sparking." Anyway, I enjoyed your post. Experiments are good. :) Best regards, Larry Smith -----Original Message----- From: si-list-bounce@xxxxxxxxxxxxx [mailto:si-list-bounce@xxxxxxxxxxxxx] On Behalf Of Loyer, Jeff Sent: Friday, November 14, 2014 3:03 PM To: si-list (si-list@xxxxxxxxxxxxx) Subject: [SI-LIST] Re: Honey, your conductors are ready! Interesting responses. I'm surprised that no one on this list braved the experiment (though I still can't recommend it, since I don't know all the things that can go wrong, as my wife will attest). I'm a huge fan of Feynman, and would wager that he'd risk his microwave to try it. Placing conductors in a microwave is not necessarily a bad thing. If you buy a chicken pot pie that promises "even browning" you'll probably see it comes in a rather shiny bowl. Put an ohmmeter to that bowl and you'll find that it's a conductor! (or at least parts of it are) The folks who make microwaveable food understand what conductors do when exposed to microwave energy and take advantage of it, we (signal integrity engineers who transmit microwave-frequency data) should also, I think. And, we should understand the difference between the fundamental microwave mechanisms at play in a dielectric (chocolate bar) and a conductor. I also don't think a simulation accomplishes the goal - I devised this experiment for a class I'm putting together, and I'm trying to remove a layer of abstraction for the audience. Showing them the results of a simulation won't be nearly as effective as demonstrating that one piece of foil is hotter than heck, while the other is relatively cool, all with items everyone has access to. I think a physical demonstration will allow people to "grok" why a rough surface (with more surface area) is a bad thing for a PCB trace. And, as someone pointed out off-line, how would you prove correlation between your simulation and test results? :-) I wonder what percentage of EM PHd's would predict correctly the results of this test? (I'm guessing Dr. Huray's students would fare well) I guess we'll have to wait a bit for the results of the test, when I get back from China (unless my brother pulls through for me, he has an old microwave he was tossing and might be willing to try it). Jeff Loyer From: Loyer, Jeff Sent: Friday, November 14, 2014 5:21 AM To: si-list (si-list@xxxxxxxxxxxxx) Subject: Honey, your conductors are ready! I thought you all might enjoy hearing the results from an experiment I recently concocted (but haven't yet completed). Here's how it was crafted: Cut 2 identical squares of aluminum foil. Shape one of those into a ball, really tight and compressed (sphere = minimum surface area). Leave the other one flat (maximum surface area). Put them both in the microwave and heat them for 15 seconds (not sure of exact time). See if there's a significant difference in the temperature between them. The flat sheet should be much hotter - more surface area for the microwaves to impinge upon. Here's what I've learned from this exercise so far: 1) Don't do this unless you're prepared to buy a new microwave, or can live with lots of singe marks. 2) If you blow the microwave circuit breaker, reset it quickly if you have a freezer on the same circuit. 3) Don't have your spouse try this while you're in business in China - wait until you can do it properly. 4) The foil has to be small enough not to contact the walls. As you can guess, I asked my spouse to try it. I'm in China but was anxious to hear the results. I should have waited! :-) Here's the text from her synopsis: "Well. Our microwave looks like he[ck] - burned the door seal, and put black streaks on the back wall. My flat piece of foil was not a square - it was a rectangle, so the edges grazed the sides of the box insides as the tray rotated. There was lots of arcing, sparking, and color. But as far as Kath and I could tell, neither piece got warm!!!! Go figure! I could try again. [note from Jeff: how did I find this woman?!?!] I began with a rectangular piece approximately 4 inches by 6 inches. Should have tried a square. Had difficulty making a ball out of the one piece, after a certain point of compressing it. It was a little more of a prism than circular. But close. We weren't clear if you wanted both pieces in the microwave at the same time, or if the test should be run separately for 15 seconds. We (Kath and I) decided to put them both in, beside each other, but not touching. All the arcing activity caused the ball to roll under the rectangle, though. At least so it seemed. The pieces were lightly stuck together when we were done." Anyway, I still think it's a cool demonstration of the fundamental principle that a layman can try (if they're brave or dumb). There's a nice limit that, if the sphere is small enough to equal the skin depth, the two pieces will heat evenly (I think). I'm anxious to try it when I get home. If you choose to try this in the next week at the risk of your microwave and food in your freezer, please let me know what you find. Cheers, Jeff Loyer ------------------------------------------------------------------ To unsubscribe from si-list: si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field or to administer your membership from a web page, go to: //www.freelists.org/webpage/si-list For help: si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field List forum is accessible at: http://tech.groups.yahoo.com/group/si-list List archives are viewable at: //www.freelists.org/archives/si-list Old (prior to June 6, 2001) list archives are viewable at: http://www.qsl.net/wb6tpu ------------------------------------------------------------------ To unsubscribe from si-list: si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field or to administer your membership from a web page, go to: //www.freelists.org/webpage/si-list For help: si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field List forum is accessible at: http://tech.groups.yahoo.com/group/si-list List archives are viewable at: //www.freelists.org/archives/si-list Old (prior to June 6, 2001) list archives are viewable at: http://www.qsl.net/wb6tpu This email and any attachments are intended for the sole use of the named recipient(s) and contain(s) confidential information that may be proprietary, privileged or copyrighted under applicable law. If you are not the intended recipient, do not read, copy, or forward this email message or any attachments. Delete this email message and any attachments immediately. ------------------------------------------------------------------ To unsubscribe from si-list: si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field or to administer your membership from a web page, go to: //www.freelists.org/webpage/si-list For help: si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field List forum is accessible at: http://tech.groups.yahoo.com/group/si-list List archives are viewable at: //www.freelists.org/archives/si-list Old (prior to June 6, 2001) list archives are viewable at: http://www.qsl.net/wb6tpu