Hello all, I use Cadense SQ to do some analysis. I find the thresholds in model are following. min typ max Hi v1 v3 v5 Lo v2 v4 v6 v2 < v4 < v6 < v1 < v3 < v5 When analyzing the slow mode, the SigWave show the Vih = v5, Vil = v2. I think the true thresholds should be v6 and v5. Is it correct? If the Vil and Vih showed in SQ is not correct, how to deal with it? B.R. Astrom ___________________________________________________________ 雅虎免费G邮箱-中国第一绝无垃圾邮件骚扰超大邮箱 http://cn.mail.yahoo.com ------------------------------------------------------------------ To unsubscribe from si-list: si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field or to administer your membership from a web page, go to: //www.freelists.org/webpage/si-list For help: si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field List FAQ wiki page is located at: http://si-list.org/wiki/wiki.pl?Si-List_FAQ List technical documents are available at: http://www.si-list.org List archives are viewable at: //www.freelists.org/archives/si-list or at our remote archives: http://groups.yahoo.com/group/si-list/messages Old (prior to June 6, 2001) list archives are viewable at: http://www.qsl.net/wb6tpu