[SI-LIST] Etch back - plating tail effect
- From: "Rebelo, Ashley (Ash)" <arebelo@xxxxxxxxx>
- To: si-list@xxxxxxxxxxxxx
- Date: Tue, 8 Jan 2002 16:06:04 -0500
Hi all,
I have question in regards to the plating tail on a signal trace that is
left after etch back: What is the minimum length for this tail that would
cause a signal integrity problem (antenna effect)? I am concerned because
it's a high speed application.
Thanks for the help,
ASHLEY
------------------------------------------------------------------
To unsubscribe from si-list:
si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field
or to administer your membership from a web page, go to:
//www.freelists.org/webpage/si-list
For help:
si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field
List archives are viewable at:
//www.freelists.org/archives/si-list
or at our remote archives:
http://groups.yahoo.com/group/si-list/messages
Old (prior to June 6, 2001) list archives are viewable at:
http://www.qsl.net/wb6tpu
Other related posts:
