I am just trying to compare simulated vs measured waveforms. On Wed, Nov 26, 2014 at 9:20 PM, Muranyi, Arpad <Arpad_Muranyi@xxxxxxxxxx> wrote: > From: Muranyi, Arpad > Sent: Wednesday, November 26, 2014 9:47 AM > To: SI-List > Subject: RE: [SI-LIST] Re: Calculating rise time from IBIS > Hitesh, > > What are you trying to do with the 10-90% of 3.3 V? > The reason I am asking is because the âscaledâ value > might be wrong depending on what you are using it for⦠> > Thanks, > > Arpad > ======================================================> > From: Hithesh [mailto:hitheshn@xxxxxxxxx] > Sent: Wednesday, November 26, 2014 12:59 AM > To: Muranyi, Arpad > Cc: SI-List > Subject: Re: [SI-LIST] Re: Calculating rise time from IBIS > > Thanks. > So for 10-90% of 3.3V, I just scale the 700mV/190ps. > This will be 2.65V/720ps. > > ------------------------------------------------------------------ > To unsubscribe from si-list: > si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field > > or to administer your membership from a web page, go to: > //www.freelists.org/webpage/si-list > > For help: > si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field > > > List forum is accessible at: > http://tech.groups.yahoo.com/group/si-list > > List archives are viewable at: > //www.freelists.org/archives/si-list > > Old (prior to June 6, 2001) list archives are viewable at: > http://www.qsl.net/wb6tpu > > > ------------------------------------------------------------------ To unsubscribe from si-list: si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field or to administer your membership from a web page, go to: //www.freelists.org/webpage/si-list For help: si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field List forum is accessible at: http://tech.groups.yahoo.com/group/si-list List archives are viewable at: //www.freelists.org/archives/si-list Old (prior to June 6, 2001) list archives are viewable at: http://www.qsl.net/wb6tpu