Hi Joe, Hope this app note helps Kiran -----Original Message----- From: si-list-bounce@xxxxxxxxxxxxx [mailto:si-list-bounce@xxxxxxxxxxxxx] On Behalf Of ext Joe Paul M Sent: Wednesday, January 16, 2008 1:50 AM To: si-list@xxxxxxxxxxxxx Subject: [SI-LIST] AC Termination : Capacitor Value Is there a thumb rule for finding Capacitor value for AC Parallel termination (R-C) for single ended lines ? I came across people who feel that higher capacitor value for R-C termination , will increase capacitive loading on line and hence increase rise/fall time . Elementary SI knowledge ,makes me feel that this is not true. Am I missing something ? Joe ------------------------------------------------------------------ To unsubscribe from si-list: si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field or to administer your membership from a web page, go to: //www.freelists.org/webpage/si-list For help: si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field List technical documents are available at: http://www.si-list.net List archives are viewable at: //www.freelists.org/archives/si-list or at our remote archives: http://groups.yahoo.com/group/si-list/messages Old (prior to June 6, 2001) list archives are viewable at: http://www.qsl.net/wb6tpu -- Binary/unsupported file stripped by Ecartis -- -- Type: application/octet-stream -- File: acterm.pdf -- Desc: acterm.pdf ------------------------------------------------------------------ To unsubscribe from si-list: si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field or to administer your membership from a web page, go to: //www.freelists.org/webpage/si-list For help: si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field List technical documents are available at: http://www.si-list.net List archives are viewable at: //www.freelists.org/archives/si-list or at our remote archives: http://groups.yahoo.com/group/si-list/messages Old (prior to June 6, 2001) list archives are viewable at: http://www.qsl.net/wb6tpu