I found a place in Mexico that fixed the stuffing on one of our props.
So, it's possible.
From: scoaa-members-bounces@xxxxxxxxx
[mailto:scoaa-members-bounces@xxxxxxxxx] On Behalf Of Stephen Wendl
Sent: Wednesday, October 09, 2013 5:30 PM
To: Carol Dean
Cc: scoaa-members@xxxxxxxxx
Subject: Re: [Scoaa-members] Props for Seawinds
You're welcome. That is the prop I use on my 2001 sw1000. I usually keep
one spare on board. and even the old ones I keep in case of emergencies.
One of the common problems is that the central hub starts spinning without
spinning the prop. I think they can be restuffed or repaired
-sww
On Oct 9, 2013, at 5:19 PM, "Carol Dean" <guydean@xxxxxxxxx> wrote:
Thanks so much, we were off on the information we previously received. Will
go with what is listed on SCOAA..
----- Original Message -----
From: Stephen Wendl <mailto:sww.scoaa@xxxxxxxxx>
To: Carol Dean <mailto:guydean@xxxxxxxxx>
Sent: Wednesday, October 09, 2013 10:02 AM
Subject: Re: Props for Seawinds
On the scoaa website www.scoaa.net you will find the partnumber for the prop
under the references section. Any yamaha dealer should be able to get them
for you
-sww
On Oct 9, 2013, at 8:57 AM, Carol Dean <guydean@xxxxxxxxx> wrote:
Graeme.
We are getting ready to return to Stray Cat in southern Mexico and need to
purchase two new props to take with us. we haven't heard back from Kurt and
hope you can help us.
Stray Cat is a model year 2000 Seawind 1000.
Thanks.
Harold Dean
----- Original Message -----
From: Carol Dean <mailto:guydean@xxxxxxxxx>
To: Kurt Jerman <mailto:kurt@xxxxxxxxxxxxxxxxxxxxxxx>
Sent: Friday, September 27, 2013 10:57 AM
Subject: Props for Seawinds
Kurt,
The parts catalogues show three different size props for the Yamaha engines.
The first one is 3 X 11 3/4 X 12 1/4. The second is 3 X11 x 11 3/4 and the
third is 3 X 11 3/4 X 9 1/4. Which one is used on the old style 9.9 high
thrust engines?
Thanks for your help. We head back to Mexico later next month.
Carol & Guy Dean
s/v Stray Cat
