[rollei_list] Re: are there more than one kind of Bay-II?
- From: Carlos Manuel Freaza <cmfreaza@xxxxxxxxxxxx>
- To: rollei_list@xxxxxxxxxxxxx
- Date: Mon, 14 Aug 2006 12:52:11 +0000 (GMT)
As I wrote previously, the difference between a Bay 1
for 6x6 film frame size lens hood (there also is Bay I
4x4 -frame size- for the Baby Rolleiflex and it could
be different regarding the Bay I 6x6) for Rolleiflex
and Rolleicord and the 2.8A is the size only, the 2.8A
lens hood is bigger than the Bay 6x6 lens hood (BTW
the 2.8A is 6x6 too regarding the film frame size) .-
All the best
Carlos
--- steven woody <narkewoody@xxxxxxxxx> escribió:
> thank you so much! i've draw a email to the seller
> but have not yet
> get the reply.
>
> please tell me, if you know, how to determind the
> lens hood is a 6x6
> or 2.8 A? if i got problem to return the item, i
> think i will need
> the info for selling it myself in local market here.
>
> On 8/14/06, Carlos Manuel Freaza
> <cmfreaza@xxxxxxxxxxxx> wrote:
> > Only to complete the info despite the difference
> is
> > evident looking the photographs quoted in
> > Collectcamera and eBay previously: The Bay II from
> > 3.5C or E model and Bay III lens hoods have two
> rings
> > really, the lens hood outer ring protrudes from
> the
> > inner ring and this lens hood outer ring has the
> > special cut and the regular female slots to fit it
> in
> > the taking lens accesories male holders. In the
> other
> > hand the Bay I 6x6 and 2.8A size II lens hoods
> don't
> > have a second ring protruding from an inner ring,
> the
> > female slots or cuts are in the same ring.
> >
> > All the best
> > Carlos
> >
> > --- steven woody <narkewoody@xxxxxxxxx> escribió:
> >
> > > thank you Carlos, i believe you are right and i
> have
> > > to contact the
> > > seller on eBay.
> > >
> > > On 8/14/06, Carlos Manuel Freaza
> > > <cmfreaza@xxxxxxxxxxxx> wrote:
> > > > According your description about your lens
> hood, I
> > > > have no doubt your lens hood is Bay I for 6x6
> or a
> > > > 2.8A lens hood if it has the number "34" and
> the
> > > > diameter symbol engraved in the ring, it would
> be
> > > a
> > > > rare item but I'm afraid it is not the right
> and
> > > /or
> > > > more suitable lens hood for your 3.5E (or
> > > C)camera.
> > > >
> > > > I was watching my cameras bayonet rings and
> the
> > > 2.8A
> > > > bayonet ring in several detailed photographs I
> > > have on
> > > > the 2.8A and I can say the only difference
> between
> > > my
> > > > Bay I Rolleicord IV and the the 2.8A size II
> > > bayonet
> > > > ring is the size. Both rings (Bay I and 2.8A
> size
> > > II)
> > > > have identical placement for the taking lens
> outer
> > > > ring accesories male holders, at 7-8 hours
> > > position,
> > > > at 12 hours position and 4-5 hours position.
> > > > In the other hand, these accesories male
> holders
> > > for
> > > > the Bay II from the 3.5E (or C) cameras are
> placed
> > > at
> > > > 10-11 hours position, 1-2 hours position and 6
> > > hours
> > > > position; the Bay III accesories male holders
> have
> > > > identical placement regarding the Bay II from
> 3.5C
> > > (or
> > > > E) cameras (always talking about the taking
> lens
> > > outer
> > > > ring).-
> > > >
> > > > All the best
> > > > Carlos
> > > > --- steven woody <narkewoody@xxxxxxxxx>
> escribió:
> > > >
> > > > > On 8/14/06, Carlos Manuel Freaza
> > > > > <cmfreaza@xxxxxxxxxxxx> wrote:
> > > > > > Steve, I have a long experience using Bay
> II
> > > lens
> > > > > > hoods, first with my former 3.5E and now
> with
> > > the
> > > > > > 3.5F, the Bay II lens hood has a point
> where
> > > it
> > > > > fits
> > > > > > easily, it's very difficult to fit if you
> > > can't
> > > > > find
> > > > > > the point, the point is between 10 and 11
> > > hours
> > > > > > considering the F&H logo position
> regarding
> > > the 12
> > > > > > hours position on the taking lens outer
> ring,
> > > if
> > > > > the
> > > > > > lens hood is in the right point you turn
> it to
> > > 12
> > > > > > hours and it clicks easily at 12 hours
> > > coinciding
> > > > > the
> > > > > > 12 hours position for the lens hood and
> taking
> > > > > lens
> > > > > > ring.
> > > > >
> > > > > many thanks for the info. since my camera
> was
> > > > > lefted in my home and i
> > > > > am now in office, i will try the operation
> you
> > > > > mention as soon as i
> > > > > go back home.
> > > > >
> > > > > but, by far, after checked the picture you
> > > proviced,
> > > > > i believe my lens
> > > > > hood don't has the cut shown in the picture.
> it
> > > look
> > > > > like what you
> > > > > mentioned the ebay item 170016871225. and i
> can
> > > > > remember, the lens
> > > > > hood has a 'Rollei F&H' logo and an engraved
> > > "34Φ'
> > > > > mark. however, it
> > > > > has three inner cut in its inner ring they
> > > spaced
> > > > > with each other in
> > > > > same degree.
> > > > >
> > > > > can you say more according these clues?
> > > > >
> > > > > > BTW, the lens hood Bay II for 3.5E and
> 3.5F
> > > has a
> > > > > > special cut on its ring with an also
> special
> > > shape
> > > > > > allowing to fit it in the taking lens
> outer
> > > ring
> > > > > and
> > > > > > avoinding the contact with the viewing
> lens
> > > outer
> > > > > ring
> > > > > > (and with the shutter speeds wheel), the
> lens
> > > hood
> > > > > > covers the taking lens outer ring thanks
> to
> > > this
> > > > > > special cut.
> > > > > > If your lens hood has an entire ring
> without
> > > cut
> > > > > it
> > > > > > could be a Bay I lens hood for Rolleiflex
> 6x6
> > > and
> > > > > > Rolleicord, or it could be a lens hood for
> > > 2.8A,
> > > > > > similar Bay II size but with an entire
> ring
> > > like
> > > > > the
> > > > > > Bay I lens hood I have mentioned, I think
> this
> > > > > lens
> > > > > > hood would be very difficult if not
> impossible
>
=== message truncated ===
__________________________________________________
Preguntá. Respondé. Descubrí.
Todo lo que querías saber, y lo que ni imaginabas,
está en Yahoo! Respuestas (Beta).
¡Probalo ya!
http://www.yahoo.com.ar/respuestas
---
Rollei List
- Post to rollei_list@xxxxxxxxxxxxx
- Subscribe at rollei_list-request@xxxxxxxxxxxxx with 'subscribe'
in the subject field OR by logging into www.freelists.org
- Unsubscribe at rollei_list-request@xxxxxxxxxxxxx with
'unsubscribe' in the subject field OR by logging into www.freelists.org
- Online, searchable archives are available at
//www.freelists.org/archives/rollei_list
Other related posts:
