[rollei_list] Re: WTB -P11 reflector
- From: "Richard Knoppow" <dickburk@xxxxxxxxxxxxx>
- To: <rollei_list@xxxxxxxxxxxxx>
- Date: Fri, 12 Dec 2008 11:52:46 -0800
----- Original Message -----
From: stephen@xxxxxxxxxxxxxxxxxx
To: rollei_list@xxxxxxxxxxxxx
Sent: Friday, December 12, 2008 10:29 AM
Subject: [rollei_list] Re: WTB -P11 reflector
Hi John:
Edmunds Scientific still sells 'First Surface Flat Mirrors'.
You should be able to take one of those with your broken
mirror to a glazier and have him cut you an exact
replacement.
http://scientificsonline.com/product.asp_Q_pn_E_3052324_A_quick_order_E_true
-----Original Message-----
From: John Wild [mailto:jwild@xxxxxxxxxxxxxxxxxxxxxx]
Sent: Friday, December 12, 2008 04:32 AM
To: rollei_list@xxxxxxxxxxxxx
Subject: [rollei_list] WTB -P11 reflector
Is this a flat mirror? If so the Edmond mirror would
probably work but the Rollei mirror may also be a dichroic
mirror meant to reduce the heat from the lamp. I am not
familiar with the internals of the projector. Edmonds might
have dichroics of the right sort.
The trick to cutting thin glass is to use a carbide
scribe rather than a glass cutter. Such scribes are
available at hardware stores. I got one at Home Depot for a
few dollars.
--
Richard Knoppow
Los Angeles, CA, USA
dickburk@xxxxxxxxxxxxx
---
Rollei List
- Post to rollei_list@xxxxxxxxxxxxx
- Subscribe at rollei_list-request@xxxxxxxxxxxxx with 'subscribe'
in the subject field OR by logging into www.freelists.org
- Unsubscribe at rollei_list-request@xxxxxxxxxxxxx with
'unsubscribe' in the subject field OR by logging into www.freelists.org
- Online, searchable archives are available at
//www.freelists.org/archives/rollei_list
Other related posts:
