Thanks for this data Richard. Chat On 11/1/06, Richard Knoppow <dickburk@xxxxxxxxxxxxx> wrote:
----- Original Message ----- From: <chatanooga@xxxxxxxxx> To: <rollei_list@xxxxxxxxxxxxx> Sent: Wednesday, November 01, 2006 8:24 AM Subject: [rollei_list] Re: Minimum 'throw; for cable release to activate Rolleiflex shutter? > Thanks, Richard. I can actually poke the cable pin through > the socket and > get the shutter to trip so I'm not sure about the missing > pin. In the > meantime I'll contact the CLA'er and also look for a > deeper cable release. > rgds > Chat > Again, I'm not sure of the F series but other Rolleis will operate with rather short throw cables. I measured the throw necessary for an MX Rollei and it is about 7mm. The Gauthier cables originally supplied with the camera is capable of about a 15mm throw. I can't check my 2.8E because it has film in it. --- Richard Knoppow Los Angeles, CA, USA dickburk@xxxxxxxxxxxxx --- Rollei List - Post to rollei_list@xxxxxxxxxxxxx - Subscribe at rollei_list-request@xxxxxxxxxxxxx with 'subscribe' in the subject field OR by logging into www.freelists.org - Unsubscribe at rollei_list-request@xxxxxxxxxxxxx with 'unsubscribe' in the subject field OR by logging into www.freelists.org - Online, searchable archives are available at //www.freelists.org/archives/rollei_list