Yes, that's right. What David and Vern said.
On Wed, Jan 25, 2017 at 12:14 PM, Vern Knowles <knowles.vern@xxxxxxxxx>
wrote:
I would caution against removing the diode. An SSR has no magnetic field
but the solenoid does! The diode is there to prevent the voltage spike
generated by the solenoid from damaging the SSR.
Vern
*From:* roc-chat-bounce@xxxxxxxxxxxxx [mailto:roc-chat-bounce@
freelists.org] *On Behalf Of *David Erbas-White
*Sent:* Wednesday, January 25, 2017 11:13 AM
*To:* roc-chat@xxxxxxxxxxxxx
*Subject:* [roc-chat] Re: Resistance for Electric Matches
On 1/25/2017 10:07 AM, Mike Kramer wrote:
Mike,
Not needed for SSR, it's simply for those that operate magnetically. The
collapsing magnetic field can produce a very large voltage spike in the
opposing direction -- not a lot of power behind it, which is why the diode
can handle it (while keeping the negative voltage minimal), but the
magnitude of the voltage can damage control circuitry. By definition, the
SSR has no magnetic field that you have to worry about...
David Erbas-White
P.S. It might be that some SSRs would require a diode wired differently in
order to ensure you don't accidentally reverse the polarity, but one would
think that is built in to most SSRs these days.
Do you need the diode for SSR? Or just mechanical coils and relays?
Mike
