Does anyone have an .stl for a 54mm AV bay?
On Mon, Mar 22, 2021 at 12:34 Chris J Kobel <chris.j.kobel@xxxxxxxx> wrote:
Same combination for the Kobels…---
*From:* roc-chat-bounce@xxxxxxxxxxxxx <roc-chat-bounce@xxxxxxxxxxxxx> *On
Behalf Of *BRIAN SUTTON
*Sent:* Monday, March 22, 2021 8:16 AM
*To:* roc-chat@xxxxxxxxxxxxx
*Subject:* [roc-chat] Re: PerfectFlite Stratologger CF Altimeters
Wedge-🤦♂️
Bad pun. However I agree. I use a Stratologger and RRC in “Cancer Sucks”
On Mar 22, 2021, at 7:44 AM, Wedge Oldham <wedgeoldham@xxxxxxxxx> wrote:
I feel it’s better to have two different, from two different manufactures.
Assuming there is a set of circumstances that effects and causes the
altimeter to fail.
One manufacture may not correct for it; or it may only be corrected in one
altimeter.
1 manufacture and 1 altimeter gives you a 50/50. Not effected/Is effected.
If 1 altimeter is effected; having two of the same means they will both be
effected by the same circumstances.
It is likely the manufacture will use the same firmware engineer for both
of his products. Therefore it is likely the circumstances that caused
altimeter A to fail; are likely to be repeated in altimeter B.
Two Manufactures, Two different altimeters. Unless you’re using Olsen
altimeters and you just wanna say “Look honey, The Olsen Twins”.
Sent from my iPhone
On Mar 22, 2021, at 7:25 AM, Michael Kramer <mike@xxxxxxxxxxxx> wrote:
not to get all Kevlar vs nylon but...
Just checking peoples philosophy, if you have a redundant altimeter,
better to have;
a) 2 identical ones (Stratologger CF - Stratologger CF )
b) 2 different ones, each from different manufactures (I.E. Stratologger
CF - RRC3)
c) 2 different ones, same manufactures (I.E. RRC2 and RRC3)
d) doesn't matter any combination works
Mike Kramer
On 3/20/2021 11:00 AM, Chris J Kobel wrote:
Richard,
Darn it, left work at 3:30 and missed it! I had the website up and
refreshing and everything.
Thanks for the heads up, I’ll just have to keep trying.
Chris
*From:* roc-chat-bounce@xxxxxxxxxxxxx <roc-chat-bounce@xxxxxxxxxxxxx>
<roc-chat-bounce@xxxxxxxxxxxxx> *On Behalf Of *richard dierking
*Sent:* Friday, March 19, 2021 8:06 PM
*To:* roc-chat@xxxxxxxxxxxxx
*Subject:* [roc-chat] Re: PerfectFlite Stratologger CF Altimeters
Well, hopefully Chris got my email and placed his order. Perfectflite
Direct had CF's in stock for a couple hours. Now showing out of stock
again. :-(
On Mar 19, 2021, at 2:01 PM, Chris J Kobel <chris.j.kobel@xxxxxxxx> wrote:
Thanks Mike and all,
I just might have to try that!
Chris
*From:* roc-chat-bounce@xxxxxxxxxxxxx <roc-chat-bounce@xxxxxxxxxxxxx> *On
Behalf Of *Mike Riss
*Sent:* Friday, March 19, 2021 1:46 PM
*To:* roc-chat@xxxxxxxxxxxxx
*Subject:* [roc-chat] Re: PerfectFlite Stratologger CF Altimeters
Chris,
Seems like waiting for SLCF's to become available is like hunting for
snipe ;-)
In the meantime, I'd recommend trying Eggtimer's Quantum. Pick up an
Apogee and a Quark while you're at it.
Mike
On Friday, March 19, 2021, 12:47:18 PM PDT, Chris J Kobel <
chris.j.kobel@xxxxxxxx> wrote:
Just wondering, anybody know why PerfectFlite Stratologger CF Altimeters
have been unavailable for so long?
Thanks
Chris Kobel
(looking forward to see you all April 10!)
--
