We should talk about frequencies and what to use.
The frequencies everyone has stated so far could have issues if you travel.
The BRB is very low power and not likely to cause interference, but 434Mhz is
an input frequency for Amateur Television repeaters in the area. Most of the
freqs mentioned are FM repeater outputs.
At Lucerne lakebed none of these is much of an issue, but in other areas you
may be swamped out by much higher power signals.
Kudos to Rick using the band plan!
Warner, check your app store for APRS apps. Apple has some issues, but should
be able to work on audio. The specific app I use is only Android, and has
provision to encode/decode APRS using audio.
For those interested, I have a write up from a few years ago on my Ham Projects
web page at:http://www.qsl.net/w6dps
Basically I am playing with getting the audio from the receiver to the phone,
and the app does everything else. Note that none of this is my original work...
I am also working on some fairly small 70cm ADRF trackers with Arduino Nano
producing morse code messages.
I will be around all three days at ROCstock, and will be happy to play "show
and tell".
Dave SmithW6DPS
Sent from Yahoo Mail on Android
On Wed, May 30, 2018 at 10:55 AM, Warner Recabaren<warnerr@xxxxxxxxxxxxx>
wrote: nice to see you here Greg! Great product! Not sure if i will make it
to Rocstock yet... Dave S- any chance on also porting to apple?
Sent from my iPhone ...
On May 30, 2018, at 10:46 AM, Greg Clark <bigredbee@xxxxxxxxx> wrote:
Greg from BigRedBee here.
APRS is a specific data format. In the US, people have standardized on using
144.390 Mhz for the distributed network of receivers and digipeaters. The
product I recommend for rocketry actually runs on the 70cm band. As long as
you have an appropriate receiver tuned to the right frequency, you can use any
frequency you'd like!
GregK7RKT
On Wed, May 30, 2018 at 10:41 AM, Michael Klett <xsive.guy@xxxxxxxxx> wrote:
Hmm, interesting. I see Beeline and APRS mixed together in this thread. And
I'm a little confused.
The Beeline (Big Red Bee) folks are all mentioning different RF frequencies and
APRS is typically on one frequency, 144.390 MHz IIRC. Is Beeline APRS or a
different format? If it is APRS shouldn't it be on the same frequency?
Just wondering and wanting to learn.
73,AG6VQ
On Tue, May 29, 2018 at 11:09 PM, David P Smith <dmarc-noreply@xxxxxxxxxxxxx>
wrote:
Okay, should be interesting.
I will be putting together a simple interface to use with APRSDroid on my phone.
See you then!
Dave SmithW6DPS
Sent from Yahoo Mail on Android
On Tue, May 29, 2018 at 9:27 PM,
Bandman444@xxxxxxxxx<dmarc-noreply@xxxxxxxxxxxxx> wrote: KR0CKT 444.440
See you out there, I’m interested in seeing what you are setting up.
Bryce Chanes
On May 29, 2018, at 8:52 PM, Andrew Wimmer <xenonrocket@xxxxxxxxx> wrote:
KD0FTK Beeline on 444.850, also Friday
-Andrew
On Tue, May 29, 2018 at 8:26 PM, David P Smith <dmarc-noreply@xxxxxxxxxxxxx>
wrote:
I will testing my mobile on UHF, and am putting together a simple portable rig
That I would like to try out. I am particularly interested in testing with a
Beeline.
I will be in touch.
Dave Smith
Sent from Yahoo Mail on Android
On Tue, May 29, 2018 at 8:21 PM, Allen Farrington<allen.farrington@xxxxxx>
wrote: Yep, K6AHF Beeline on 444.55. Planning for Friday.Allen
------------------------------ ------------------------------ --------
Allen H. Farringtonhttp://www.allenfarrington.org818-653-2284
Sent from Yahoo Mail on Android
--
I shall live in the house of the Lord all the days of my life.Psalm 23:6cd
