[rc3r] Re: Small Layout Update

  • From: William Robertson <wsrsummer@xxxxxxxxx>
  • To: rc3r@xxxxxxxxxxxxx
  • Date: Mon, 12 Mar 2018 08:33:23 -0400

Looks good. Provides opportunities for buildings, a train station  and
cars/trucks  etc..

On Mon, Mar 12, 2018 at 8:12 AM, Thomas Gilsdorf <tlg225ccr94@xxxxxxxxxxx>
wrote:

First of all; thanks to everyone for the input. I sincerely want this to be*
our layout,* not just something that "Tom" threw together.

Here's the latest.

Add a straight in the lower right corner. 10" OK Move the switch up. OK,
5" works
Curve the siding in the center and extend into the next module. OK
Second siding. Still an access problem. It can be re-added, but this is
what it looks like w/o it.
Move the lower cross-over to the left. OK

Thomas Gilsdorf
tlg225ccr94@xxxxxxxxxxx


-----Original Message-----
From: John Crockett <dmarc-noreply@xxxxxxxxxxxxx>
To: rc3r <rc3r@xxxxxxxxxxxxx>
Sent: Sun, Mar 11, 2018 11:17 pm
Subject: [rc3r] Re: Small Layout Update

I like the curve on the right side, but the sharper curves can be
problematic.   It does give the layout a little extra character.  I still
vote for one siding, and unless it is going to supply an industry, I would
take it out.

John


-----Original Message-----
From: Peter Condro <pcondro@xxxxxxxxx>
To: rc3r <rc3r@xxxxxxxxxxxxx>
Sent: Sun, Mar 11, 2018 8:30 pm
Subject: [rc3r] Re: Small Layout Update


What about this?  It makes it easier to access the sidings and takes out
an S curve.






On Mar 11, 2018, at 6:18 PM, Wally Ubik <wally.ubik@xxxxxxxxxx> wrote:

Tom, I vote for 2 sidings.  However, I can be bought.  I may be easy, but
I’m not cheap…..

Wally

On Mar 11, 2018, at 3:53 PM, Thomas Gilsdorf <tlg225ccr94@xxxxxxxxxxx>
wrote:

Two sidings it is. We'll need to be careful. Reaching cars on the siding
could be an issue.

I had originally intended to reuse the original small layout. Those
modules are red, new ones are green. The plan now is to build 7 new modules.

Thomas Gilsdorf
tlg225ccr94@xxxxxxxxxxx





JPEG image

Other related posts: