[rc3r] Re: Small Layout Update

  • From: Wally Ubik <wally.ubik@xxxxxxxxxx>
  • To: rc3r@xxxxxxxxxxxxx
  • Date: Sat, 10 Mar 2018 17:16:01 -0500

I approve.   

Wally

Sent from my iPhone

On Mar 10, 2018, at 4:35 PM, Thomas Gilsdorf <tlg225ccr94@xxxxxxxxxxx> wrote:

I have heard from some of you regarding the small layout updates. Attached is 
the current track plan. Please let me know if there are any suggestions, 
questions, or comments.

As a reminder, Kevin has already acquired beautiful red skirting that is 
sized to fit this layout plan.

There is a small window to get this done in the next month. I have time to 
devote to this before Wally gets the power cart(s) built. The goal will be to 
have this operational before 5/12/18. 

We are currently sourcing good/used FasTrack for this project. New track 
purchases will be kept to an absolute minimum. I just got four 036 manual 
switches (2 LH, 2 RH) from the OGR forum for $11.25 ea (delivered). IF the 
decision is to not proceed, I'll just keep these for myself. The plan uses a 
total of 6 LH/6RH. 

After meeting with Peter today, we feel that it will be most prudent to leave 
the existing alone and operational. We will build-out 7 new modules and use 
the existing 12 (short) legs. The expansion will require 12 new ones. In the 
event the large layout is not in use, the longer legs from the big layout can 
be used to raise this display.

There will be a 3x6 cart constructed. This will allow us to roll these 
modules off of the trailer and into the venue in one trip. The plan is to 
accommodate the legs and barriers on the cart as well. 

Fifteen 3' long Lexan "universal" barriers will be pre-drilled. They will be 
constructed so that any barrier will fit in any position.

Estimated cost will be less than $2K. If you do not agree/approve please let 
us know ASAP.  I have pending purchases of $232.04 for materials. These funds 
will not be committed w/o prior club approval. 

Thomas Gilsdorf
tlg225ccr94@xxxxxxxxxxx
<RC3R-2a.bmp>

Other related posts: