[python] Re: frame flexibility

  • From: "Torben Scheel" <torben_scheel@xxxxxxxxxxx>
  • To: <python@xxxxxxxxxxxxx>
  • Date: Mon, 13 Dec 2004 17:27:32 +0100

Dirk Bonne wrote: 


Does this mean you will make the seat unmovable? I am also beginning
to suspect the innocent looking rear part.

No, I'm making it 3-step adjustable, and the brackets foldable. I'm not giving up on the easy-packable concept just yet.

I'm going to make a tube that fits the flevoaxel
exactly in a lathe, and braze it in the rear frame, but maybe I can't


When I saw your python, you were not using the parts 25, 26, 47 and 27
(numbers taken from the drawing you posted). My experience with the
flevo is that these are really important to completely eliminate
flexing in the flevo pivot. And it prevents the holes from elongating
becuase the axle does not rattle anymore in these holes.

Should 26 be movable? It would be the logic solution, but also complicate dismantling/assembly a bit (well, 2 minutes instead of 1 :-))

Cheers,
Torben

============================================================

This is the Python Mailinglist at freelists.org

Listmaster: Juergen Mages jmages@xxxxxx

============================================================

Other related posts:

  1. Home
  2. python
  3. Archive
  4. 12-2004