[python] Re: New Trike

  • From: "Russell Delo" <RDELO@xxxxxxxxxxxx>
  • To: <python@xxxxxxxxxxxxx>
  • Date: Tue, 24 Oct 2006 22:56:43 -0400

This is Russ I am going to make a trike like Marks, It is nice to see one that is done. How is the handling?



----- Original Message ----- From: "Jürgen Mages" <jmages@xxxxxx>
To: <python@xxxxxxxxxxxxx>
Sent: Monday, October 23, 2006 4:12 PM
Subject: [python] Re: New Trike


What is the steering pivot made of?

The bearings are made of two pieces of Igus QFM-3034-37. they are
fixed in own-drilled Aluminium-Headsets. In the center is a 30x1 mm
Steelaxle. In this is pressed two aluminium Inlays whitch are fixed
with a 10mm screw in the middle.

That's all :-))

Hooray - finally someone who dares to use the Igus stuff for the
central pivot!

If this works out fine in the long run, it will be the lightest
pivot material ever.

Keep us in the loop Mark,

Jürgen.



============================================================

This is the Python Mailinglist

http://www.freelists.org/list/python

Listmaster: Jürgen Mages jmages@xxxxxx

To unsubscribe send an empty mail to python-request@xxxxxxxxxxxxx
with 'unsubscribe' in the subject field.

============================================================

Other related posts: