Antonio Banfi wrote:
Hello,I have absolutely no experience with Xtol, but I purchased some of it to develop rolls of tmax 3200 exposed @ 1600. I was mumbling about the following questions:1) Whats the advantage in diluting xtol instead of using the stock?
With TMY, the D/H curve is straighter diluted 1:1. Also, since I process one-shot, it is slightly cheaper.
2) Given the stock time, there is a way to calculate the “diluted time”?
I do not know. I always calibrate my stuff. You can also look up the times in F4016. http://www.kodak.com/global/en/professional/support/techPubs/f4016/f4016.pdf
3) Any suggestion from your personal experience?4) Last but not least, using a normal (non tmax) fixer, I must increase the fixing time?
It depends upon what fixer you use. See above.
Thanks to all & best regards Antonio
-- .~. Jean-David Beyer Registered Linux User 85642. /V\ PGP-Key: 9A2FC99A Registered Machine 241939. /( )\ Shrewsbury, New Jersey http://counter.li.org ^^-^^ 14:05:01 up 34 days, 20:39, 4 users, load average: 4.90, 4.71, 4.64 ============================================================================================================= To unsubscribe from this list, go to www.freelists.org and logon to your account (the same e-mail address and password you set-up when you subscribed,) and unsubscribe from there.