[pure-silver] Re: Threading Enlarger Lenses
- From: Snoopy <snoopy@xxxxxxxxxx>
- To: pure-silver@xxxxxxxxxxxxx
- Date: Thu, 07 Feb 2008 17:45:23 +0100
Hi again,
Jim Brick wrote:
On Feb 7, 2008, at 12:10 AM, Snoopy wrote:
Actually, an uneven rear would not cause the lens to sit 'not straight'
as the lens is held straight by the threads. One doesn't actually 'crank
down' on a jam nut. One simply snugs it down to hold the lens in the
proper orientation.
Well, I be damned, live and learn :-)
I've had Durst, Omega, Beseler, Federal, Leica, and ZBE enlargers. Only
the Durst and Leica were threaded. All of the others were simply clean
holes and the lens was held in with a jam nut.
WOW. What on earth do you do with these things, that you go through so
many of them ? :-) :-)
Pound them with your fists in fits of anger, when the prints don't come
out right ?
The mind boggles at various scenarios :-)
Love,
Snoopy
:-)
Jim
=============================================================================================================
To unsubscribe from this list, go to www.freelists.org and logon to your
account (the same e-mail address and password you set-up when you
subscribed,) and unsubscribe from there.
--
Snoopy EDV-Beratung
Am Rain 16
85622 Weissenfeld
Germany
Voice: +49-171-710 03 23
Paper: +49-171-719 35 28
USt-ID: DE233252526
=============================================================================================================
To unsubscribe from this list, go to www.freelists.org and logon to your
account (the same e-mail address and password you set-up when you subscribed,)
and unsubscribe from there.
Other related posts:
